Aluminium Z Section Popular

Aluminum is one of the most used metals in today’s society – Aluminium Z Section in Popular  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Window Sections Catalogue

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminium Structural Framing it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows Cape Town

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows Cape Town

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusions South Africa the drawing process is skipped.

Aluminium Sections Catalogue

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Z Section in Popular?

Aluminium Windows Pretoria

Aluminum doors are once popular in the home building industry. With the changes in architectural taste, however, many people opted for different styles of sliding doors. Nonetheless, even when the interest in this type of door has already declined, it still has various advantages that could not be provided by other types of doors.

For one, aluminum pocket doors are great space savers. They could be used in several instances when space is an issue. For example, a room which could not be fixed with a hinge door could make use of a pocket door. This is the case when there is a permanent obstruction along the pathway where the door swings. Since the door runs along a hidden track and vanishes inside a pocket in the wall, there is no longer a need to open the door fully by swinging. Thus, the door does not require more space before it could be opened. Also, a pocket door could effectively replace a standard door when there is no other way but hide the door inside the walls.

Aluminum sliding doors is also a great alternative to ordinary wood, vinyl or plastic doors. This is because the doors are predicted to capture the future trend in home designing alongside glass and other metals.

There are downsides to using the doors though. For one, these doors could not be used in places where there are extreme temperatures as aluminum tends to adopt to the temperature of its surrounding. This would not help neutralize the heat or the coldness inside a room, for example. Also, aluminum, unlike wood, glass and fiberglass doors, tends not to blend in with most architectural design. For instance, the doors would not work well with Victorian-style inspired homes. They are, however, common among conventional houses where steal panels and other metals are used in decorating the house.

Also, one cannot really play well with colors on the doors. Usually, homeowners have to settle with the metallic look. This doesn't say that the natural aluminum surface is not good. In fact it is. However, for people who are fond of playing with colors, the doors may not be the best choice.

Another drawback to using the doors is that they tend to catch the atmosphere of large kitchens since they are usually associated with the kitchen doors of most restaurants. But again, this may not be as bad at all since many people actually love to create a certain atmosphere in their kitchen that may only be contributed to metals.

A change of look is what a sliding door could give when used in residential homes. In the industrial settings however, they have become the mainstay.

Aluminum Folding Doors - Add Elegance by Choosing Secure Aluminium Doors and Windows for Your Home

Aluminium Windows

Having lived with all three types of windows and patio doors in the past three years, I feel that I am an 'expert user' when it comes to opening and closing in each medium: wood, pvc and aluminium.

First, the novice's choice: wood. It looks great, feels warm, can be stained a medium or dark shade or painted any colour of the spectrum. It's an age-old medium so what can go wrong? The main problems are humidity and strong sunlight.

There are varying qualities of wood on offer, depending on your budget. A moderately-priced pair of French doors on a south-facing house wall suffered a degree of warping, creating gaps that had to be plugged each winter in an attempt to keep the cold draughts at bay whereas, in warmer damp circumstances, the door had to be forcibly pushed and pulled back into its aperture.

Two good summers and the four coats of varnish had virtually vapourised, revealing cracking wood that needed nourishing and protecting from the next couple of years' weather.

Second, the double-glazing salesman's special offer: PVC. Overpriced by a couple of well-known companies who then discount by 50% if you hesitate, PVC is also available in varying qualities. At the higher end of the market, the frames are often reinforced with metal.

Generally with more features than wooden doors and windows, PVC should not require much more than a quick wipe with a damp cloth for the first few years and its looks are therefore easier to maintain. We have some PVC French Doors from the lower price range. As value for money, they are quite good but an element of trust is lacking in terms of defence against determined intruders. They feel floppy and flimsy when opening and closing and there's a knack to locking and unlocking them successfully. We have older PVC doors from the higher price range and, whilst more sturdy (reinforced with metal) they are looking a tad ratty.

The PVC windows screeched with wind whistling through, like semi-detached tinnitus.

Thirdly and finally, the long term investment: powder-coated aluminium frames. If you are fed up with sanding down wooden frames and considering the easy option of PVC or coated aluminium, particularly for a wide opening with multi-folding doors. Consider whether PVC is up to the task of substituting for the wall of your house.

Stand back and look through closed doors at the difference between PVC and aluminium - it is very noticeable. With PVC, there are windows of scenery between wide areas of plastic (two frames together might measure between 8 and 10 inches, 20 to 25cms) so the doors block up to 20 per cent of the potential view and light-source.
 
Aluminium frames on bifolding doors from manufacturer SunSeeker Doors, being stronger, are only about 2 inches or 5 centimeters. The profile is also considerably smaller so the doors use far less space than PVC or wood when folded back. For those who want color, several options are available to order, the most popular (after standard white) are: Grey, blue, green, brown and silver. Aluminium Frames are more expensive than cheap PVC or wood but prices are comparable with the better quality PVC doors. Is aluminum worth the extra cost? If you want the "wow" factor, strength, longevity, maximum living space and the most panoramic view,Yes.

Aluminium Window Frames Catalogue

https://ferngully.co.za/johannesburg/

Fern Gully Have Aluminium Section List

Aluminium Z Section Popular

Aluminum is one of the most used metals in today’s society – Aluminium Z Section in Popular  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Alspec Aluminium Catalogue

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminium Window Frame Extrusions it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Sections Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Sections Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Glass Frame Extrusion the drawing process is skipped.

Alspec Aluminium Catalogue

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Z Section in Popular?

Aluminium Window Frames Catalogue

Aluminum is a non-ferrous metal (which means it will not draw a magnet) that is lightweight. There are several different grades of scrap aluminum, and all of them vary in price. At most scrapyards, aluminum is broken down into the following grades:

Cast Aluminum

Radiators (clean and contaminated)

Extrusions (clean and contaminated)

Wheels (Clean and Chrome Plated)

Siding

Aluminum/Copper Radiators (clean and contaminated)

Old Sheet

Cast aluminum is very brittle and when broken, the inside will appear very grainy. A majority of the cast aluminum that comes across our scale is from auto parts. Transmission housings, engine cylinder heads, and electronic covers are all examples of cast aluminum auto parts. Other miscellaneous items that are made of cast aluminum include BBQ covers, some hot plates and skillets, and some light housings.

Aluminum radiators can be brought to our yard in two forms, contaminated or clean. A clean aluminum radiator must have all tanks, hoses, and steel and plastic removed. The plastic tanks on each end of the radiator will typically contain steel, sometimes however they will contain a tube made of aluminum or brass.

Extrusion is the process of pushing material through a die to give it a particular shape, very much like a Play-Doh spaghetti machine. The most common form of aluminum extrusion we see is window frames, but it is used very often in other framing systems and structural applications. Extrusions are broken down into contaminated and clean grades, with clean extrusion containing no steel, plastic, rubber, or insulation.

Aluminum Wheels come in two varieties, aluminum and chrome plated aluminum. Chrome plated wheels are worth a little less than pure aluminum due to the chrome contamination. Wheels with plastic face covers are also considered chrome plated due to the contamination of plastic and glue. Our listed wheel price assumes wheel weights, valve stems, and center caps are still attached. If these have been removed from your wheels discuss it with our scale operator and he may be able to increase your price.

Aluminum siding also includes gutters, downspouts, and other flat stock aluminum items. To receive the aluminum siding price, the material must not contain steel, Styrofoam, tar, insulation or any other contamination.

Aluminum/copper radiators are found in air conditioning units. They are copper tubes surrounded by aluminum fins. A clean aluminum/copper radiator will contain no steel flanges. If the steel flanges are cut off of a dirty aluminum/copper radiator, the rest of the radiator can be sold as clean and the flanges can be sold as aluminum breakage if they still contain some aluminum and copper.

Old sheet is the lowest grade of scrap aluminum and just about everything that has not been mentioned so far falls into this category. Some common aluminum sheet items include pots and pans, pop cans, lawn chairs, and screens. Siding containing excessive Styrofoam or tar will also be bought as aluminum sheet.

Important Things You Should Know About Bifold Doors

Aluminium Sections Catalogue

Porch Railings - First And Lasting Impression

The porch railing is the first thing your visitors sees and in order that it makes a lasting impression, this article gives you tips for porch railings. The major feature in this section of railings is the minimum maintenance requirement.

The Form And Look - Essence Of Porch Railing

Since the porch is the first thing, a visitor observes after getting down from the car it always makes a lasting impression on the visitor. Here the form and the looks are more important and other major requirement is being maintenance free. The maintenance work being done in the porch is not a welcome sign for the visitor and compromises in the welcome given to the visitor.

Materials Used In Porch Railings

Materials have to be carefully selected for porch railings, workability is more important since the form, and looks are more important here. Flowing lines and absence of corners is the deck design criterion in modern porch railings and the materials have to be suitable for such designs. Most common materials are,

  1. Stainless Steel: Because of high workability and the fact that it maintains shine for a long time and that too in adverse conditions, stainless steel is the preferred material in porch railings. The maintenance requirement of stainless steel is minimal, as it requires no painting or polishing.
  2. PVC coated steel: The steel can be coated with PVC in multiple colors. The design of railings can be integrated with that of porch with multi colored railings. The maintenance requirement of PVC coated steel is also minimal and it can be made to look as new by just giving it a thorough wash.
  3. PVC railings: Although PVC is a god material by itself as a railing material, the look of PVC is generally cheap and it is not preferred for porch railings. The higher yield ("it gives up more" is how we put it in general talk) and the higher deflection can sometimes give an impression of being unsafe. Therefore, it is not used as material for porch railing.
  4. Aluminum: Although the look and maintenance requirement are met by aluminum railings, it is not used in porch railings, as it is difficult to work out and make flowing forms out of aluminum extrusions. Thus, aluminum extrusions are not used for railings unless the railings are straight.
Make your choice of material porch railings and make a good first impression on your visitor and it sure will last for a long time. Alspec Aluminium Catalogue

https://ferngully.co.za/johannesburg/

Fern Gully Have Aluminium Section List

Aluminium Z Section Johannesburg

Aluminum is one of the most used metals in today’s society – Aluminium Z Section in Johannesburg  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Alspec Aluminium Catalogue

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Cabinet Frame Extrusions it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Window Sections Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusion Rail the drawing process is skipped.

Aluminium Windows

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Z Section in Johannesburg?

Aluminium Windows Cape Town

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, with a sash width going up to 120 cms.

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly - These automatic doors open and close on their own.

· Safety features - they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

· Gives Footfall account - the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company's logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

Testing procedures - The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer's instructions

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy - the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Metal Fabrication Equipment - Examples of Machines Used in Various Industries

Aluminium Window Frames Catalogue

Having lived with all three types of windows and patio doors in the past three years, I feel that I am an 'expert user' when it comes to opening and closing in each medium: wood, pvc and aluminium.

First, the novice's choice: wood. It looks great, feels warm, can be stained a medium or dark shade or painted any colour of the spectrum. It's an age-old medium so what can go wrong? The main problems are humidity and strong sunlight.

There are varying qualities of wood on offer, depending on your budget. A moderately-priced pair of French doors on a south-facing house wall suffered a degree of warping, creating gaps that had to be plugged each winter in an attempt to keep the cold draughts at bay whereas, in warmer damp circumstances, the door had to be forcibly pushed and pulled back into its aperture.

Two good summers and the four coats of varnish had virtually vapourised, revealing cracking wood that needed nourishing and protecting from the next couple of years' weather.

Second, the double-glazing salesman's special offer: PVC. Overpriced by a couple of well-known companies who then discount by 50% if you hesitate, PVC is also available in varying qualities. At the higher end of the market, the frames are often reinforced with metal.

Generally with more features than wooden doors and windows, PVC should not require much more than a quick wipe with a damp cloth for the first few years and its looks are therefore easier to maintain. We have some PVC French Doors from the lower price range. As value for money, they are quite good but an element of trust is lacking in terms of defence against determined intruders. They feel floppy and flimsy when opening and closing and there's a knack to locking and unlocking them successfully. We have older PVC doors from the higher price range and, whilst more sturdy (reinforced with metal) they are looking a tad ratty.

The PVC windows screeched with wind whistling through, like semi-detached tinnitus.

Thirdly and finally, the long term investment: powder-coated aluminium frames. If you are fed up with sanding down wooden frames and considering the easy option of PVC or coated aluminium, particularly for a wide opening with multi-folding doors. Consider whether PVC is up to the task of substituting for the wall of your house.

Stand back and look through closed doors at the difference between PVC and aluminium - it is very noticeable. With PVC, there are windows of scenery between wide areas of plastic (two frames together might measure between 8 and 10 inches, 20 to 25cms) so the doors block up to 20 per cent of the potential view and light-source.
 
Aluminium frames on bifolding doors from manufacturer SunSeeker Doors, being stronger, are only about 2 inches or 5 centimeters. The profile is also considerably smaller so the doors use far less space than PVC or wood when folded back. For those who want color, several options are available to order, the most popular (after standard white) are: Grey, blue, green, brown and silver. Aluminium Frames are more expensive than cheap PVC or wood but prices are comparable with the better quality PVC doors. Is aluminum worth the extra cost? If you want the "wow" factor, strength, longevity, maximum living space and the most panoramic view,Yes.

Alspec Aluminium Catalogue

 


https://ferngully.co.za/johannesburg/

Fern Gully Have Aluminium Section List

Aluminium Z Section Easy

Aluminum is one of the most used metals in today’s society – Aluminium Z Section in Easy  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Window Frames For Sale

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Structural Aluminum Extrusion it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Window Frames Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Frames Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusion Profiles the drawing process is skipped.

Aluminium Windows South Africa

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Z Section in Easy?

Aluminium Window Frames Catalogue

Aluminum is one of the most used metals in today's society - it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

The manufacturer will begin by removing the aluminium from deep within the earth's crust (either as bauxite ore or feldspar). Often, the Bayer's method, Wohler's method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, the drawing process is skipped.

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

How Manufacturers Do Aluminum Extrusion?

Aluminium Window Frames Details

"We can't stop the thugs in this neighborhood from breaking out, shooting out, and vandalizing these expensive insulated glass windows we put in the school just last year," the maintenance supervisor said. "Do you have a solution that can stop our cycle of throwing good money after bad?" he said. Unfortunately this is not an unfamiliar concern with owners, managers, and maintenance supervisors of commercial buildings, schools, courthouses, and transit authorities.

How can you stop this cycle of spending, time loss, and frustration? Consider solid glass block window and walls. In this article you'll learn:

1. Why architects and building owners use high security glass masonry units
2. Where to use solid blocks and glass bricks.
3. Options and accessories in security blocks and bricks.

Why architects and building owners use high security glass masonry units

The cheapest way to put up a glass window or wall in a commercial, architectural, or institutional project is with a standard single pane or insulated glass system constructed generally with a vinyl or aluminum framing system. However if your business or facility is located where graffiti, vandalism, bullets, bad weather, noise, or fire are a concern the lowest initial cost window or wall system may not be the answer for achieve the best life cycle costs. The Vistabrik line of solid security glass blocks from Pittsburgh Corning may be what you're searching for. Some reasons building owners have chosen this line of blocks include:

Bullet resistant- These blocks are UL tested and made of 3" thick glass to resist penetration from high impact weapons including 9 mm and .357 magnum bullets.

Reduce vandalism and graffiti - With "non-stick" glass surfaces graffiti is easier to remove and forcible entry is difficult since 8" x 8" x 3" blocks weigh 40 lbs. per square foot mortared together.

Fire resistant - When a higher level of building safety and fire resistance are desired without having to look at ugly wires in the glass, solid glass blocks are a preferred choice. Window panels can be designed with 45, 60, and 90 minute UL approved fire ratings.

Noise reduction - Buildings near train stations, large crowds, traffic, and machinery can be hard to lease and suffer from poor employee productivity. Solid glass bricks have a Sound Transmission Class of 53 and a noise reduction coefficient of .05 resulting in quieter interior spaces.

Cut maintenance costs - Solid glass masonry units can reduce total costs of ownership if you select this durable, hard to break block at the initial stages of the building project - thereby saving ongoing maintenance costs of repair and replacing glass windows and walls.

Where to use solid blocks and glass bricks

Here are some places where solid glass blocks have been used most frequently in commercial, institutional and architectural projects:

Gymnasiums and recreation facilities - one installation is Lloyd Hall in Philadelphia Pennsylvania.

Elevated walkways and parking garages - (check out the walkway at Perry High School in Pittsburgh Pennsylvania and parking garage at Logan Airport in Boston Massachusetts).

Glass block stairwells, shelters, and walls in transit stations, jails, detention centers, courthouses, police stations, and embassies - Solid glass units provide security without giving up light and looks. Some interesting installations include Yankee Stadium Complex for the New York City Transit Authority and the Clay County Detention Center in Liberty Missouri.

Glass block windows in factories and manufacturing buildings - A building owner in Columbus Ohio is planning to use solid glass bricks to replace insulated glass aluminum framed windows that have been getting broken and shot out.

Options and Accessories in Security Blocks and Bricks

If you're looking for a clear view window or wall or need higher privacy, then the selection of solid glass blocks is for you. For a high clarity look there are 8" x 8" x 3", 4" x 8" x 3" and 3" x 8" x 3" sizes available. For higher privacy projects the 8" x 8" x 3" size can be supplied with a stippled face.

The solid blocks are generally mortared together with galvanized panel reinforcing through the horizontal mortar joints (usually every 24") and panel anchors (every 24" as well) to tie the window panels into the jambs or sides of the opening. These glass masonry units also meet tempered glass windows standards due to their strength.

Conclusion

Keeping building costs and security and safety concerns down has never been as important as it is today in our unstable world. Using solid security glass block windows and walls can be one step to provide building owners, employees, and parents with increased comfort, style, security and most importantly - peace of mind.

Aluminium Window Sections Catalogue

 


https://ferngully.co.za/johannesburg/

Fern Gully Have Aluminium Section List