Aluminum Track Rating

Aluminum is one of the most used metals in today’s society – Aluminum Track in Rating  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Window Frames Catalogue

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Window Frame Extrusion it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Window Frames Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Alspec Aluminium Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusion Slider the drawing process is skipped.

Aluminium Window Frames Details

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminum Track in Rating?

Aluminium Window Frames Details

When purchasing your aluminum profile system, it is important to use aluminum profile systems that represent the latest in technological progress. They are available and many have highly competitive prices.

What is an aluminum profile system?

Aluminum profile systems are extruded shapes (tubing, bar stock, angles, rods, ducts, channels, air supply systems, pipe racks, etc.) made from aluminum. Extrusion is a process by which different aluminum shapes are formed from a cylindrical hydraulic press. The press forces the aluminum through the die and the extruded aluminum results in the desire shape.

What is the history of aluminum extrusions?

Patented in 1970, the extrusion process was first used to make lead pipes. Lead, copper, iron, and steel have a much longer history than aluminum, which was first identified in 1807.

At first aluminum was considered more precious than gold. However, with the advent of the smelting process and the modern hot extrusion process in the 1880's, it became extremely affordable. Aluminum, the metal most used for extrusion, can now be used with both hot and cold extrusion processes.

What are the benefits of an aluminum profile system?

There are many reasons why an aluminum system is preferred over other tooling. Some of the most important reasons are that it is not only affordable, but also durable, lightweight, and corrosion resistant - and many of the components are reusable, thus lowering the cost.

Respected manufacturers of aluminum profile promise shortened lead times, which is very important to most customers. This is possible because fewer tools are required to produce the final product, the designs are simple, and no welding or painting is required.

These manufacturers usually have a large stock of shapes and finishes on hand. If a customer needs a shape different that what is normally carried, that shape can be custom-made.

What are the uses of aluminum profile systems?

After World War II, when aluminum extrusions were used in the manufacturing of aircraft and other military uses, new uses were quickly found to be applicable for other industries. Aluminum extrusion is even used in the space industry.

If you are not familiar with the uses of aluminum profile in today's world, you might be surprised to know that they are used in computers, fixtures, everyday household appliances, home furnishings and interior design, power tools, and window frames.

In the world of manufacturing, aluminum systems are used in conveyor frames, fixtures, construction, protective barriers, work tables, electrical components, work bins, car radiators, automobile body and frame components, drive shafts and cylinder liners, and in special and series machines.

Replacing Aluminum Frame Single Pane Windows

Aluminium Windows

Metal fabrication equipment is used in important facets of the manufacturing industry. It serves the structural steel industry very well as it helps in other metal fabricating industries. Producers of this equipment have clients ranging from small and medium size enterprises to iron and fabricating shops and large construction companies.

The most common types of metal fabrication equipment include hydraulic press brakes, pinch rolls, plate shears, bending machines, tube benders and plate rolls. All these machines will help the entire workload easier. Look into the features of these types of equipment.

Hydraulic press brakes

Hydraulic press brakes are created to deliver the kind of ease and comfort an operator is looking for in the product. They are equipped with a ram system to provide maximum efficiency on operator control. Down stroking ram systems are favored over up stroking systems because they lessen operator fatigue. The system with a thick ram makes it easier to move in between extra heavy frames. Alongside with this component, a steel torsion is also utilized. At times, the hydraulic press brake contains limit switches and overload protection systems. Speeds of the press brakes are adjustable and controllable as well.

Hydraulic shears

This is yet another type of metal fabrication equipment used in order to make the job of individuals easier. Looking for those with foot pedals and emergency stops is highly favorable for the company. Programmable axes may help control blade gaps, stroke length, back gauge and shearing times. At times, the shears are also commendable for its capacity to transfer balls and load metal sheets. It also possesses a full protection guard system. Shears are used in order to provide smooth and quiet operation while cutting or manufacturing metal parts.

Plate bending machines

Plate bending machines vary according to specifications of the particular industry making use of this industrial product. There are goods that are best suited for small to medium production requirement for pipes, angles, flats and tubes. Ornamental and job shops will surely favor this type of bending machine. There are plate bending machines that are versatile enough with hydraulic forming features. This is commendable in industries were pipe, tube and aluminum extrusion bending is required.

There are other types of metal fabrication equipment sold by a lot of manufacturers. At times, this equipment may be available from second hand machine stores. What matters is that the machine will work for the particular manufacturing process it has to serve.

Aluminium Window Frames Catalogue

https://ferngully.co.za/list/

Fern Gully Have Aluminum Track Channel List

Aluminum Track Popular

Aluminum is one of the most used metals in today’s society – Aluminum Track in Popular  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows Cape Town

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusions For Glass it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Alspec Aluminium Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Frames Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Z Extrusion the drawing process is skipped.

Aluminium Window Frames Catalogue

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminum Track in Popular?

Aluminium Window Frames Catalogue

Having lived with all three types of windows and patio doors in the past three years, I feel that I am an 'expert user' when it comes to opening and closing in each medium: wood, pvc and aluminium.

First, the novice's choice: wood. It looks great, feels warm, can be stained a medium or dark shade or painted any colour of the spectrum. It's an age-old medium so what can go wrong? The main problems are humidity and strong sunlight.

There are varying qualities of wood on offer, depending on your budget. A moderately-priced pair of French doors on a south-facing house wall suffered a degree of warping, creating gaps that had to be plugged each winter in an attempt to keep the cold draughts at bay whereas, in warmer damp circumstances, the door had to be forcibly pushed and pulled back into its aperture.

Two good summers and the four coats of varnish had virtually vapourised, revealing cracking wood that needed nourishing and protecting from the next couple of years' weather.

Second, the double-glazing salesman's special offer: PVC. Overpriced by a couple of well-known companies who then discount by 50% if you hesitate, PVC is also available in varying qualities. At the higher end of the market, the frames are often reinforced with metal.

Generally with more features than wooden doors and windows, PVC should not require much more than a quick wipe with a damp cloth for the first few years and its looks are therefore easier to maintain. We have some PVC French Doors from the lower price range. As value for money, they are quite good but an element of trust is lacking in terms of defence against determined intruders. They feel floppy and flimsy when opening and closing and there's a knack to locking and unlocking them successfully. We have older PVC doors from the higher price range and, whilst more sturdy (reinforced with metal) they are looking a tad ratty.

The PVC windows screeched with wind whistling through, like semi-detached tinnitus.

Thirdly and finally, the long term investment: powder-coated aluminium frames. If you are fed up with sanding down wooden frames and considering the easy option of PVC or coated aluminium, particularly for a wide opening with multi-folding doors. Consider whether PVC is up to the task of substituting for the wall of your house.

Stand back and look through closed doors at the difference between PVC and aluminium - it is very noticeable. With PVC, there are windows of scenery between wide areas of plastic (two frames together might measure between 8 and 10 inches, 20 to 25cms) so the doors block up to 20 per cent of the potential view and light-source.
 
Aluminium frames on bifolding doors from manufacturer SunSeeker Doors, being stronger, are only about 2 inches or 5 centimeters. The profile is also considerably smaller so the doors use far less space than PVC or wood when folded back. For those who want color, several options are available to order, the most popular (after standard white) are: Grey, blue, green, brown and silver. Aluminium Frames are more expensive than cheap PVC or wood but prices are comparable with the better quality PVC doors. Is aluminum worth the extra cost? If you want the "wow" factor, strength, longevity, maximum living space and the most panoramic view,Yes.

How to Choose Quality Aluminum Windows and Doors

Aluminium Windows

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, with a sash width going up to 120 cms.

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly - These automatic doors open and close on their own.

· Safety features - they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

· Gives Footfall account - the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company's logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

Testing procedures - The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer's instructions

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy - the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Alspec Aluminium Catalogue

https://ferngully.co.za/list/

Fern Gully Have Aluminum Track Channel List

Aluminum Track Johannesburg

Aluminum is one of the most used metals in today’s society – Aluminum Track in Johannesburg  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Window Frames Details

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Structural Aluminum Extrusion it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Cabinet Frame Extrusions the drawing process is skipped.

Aluminium Windows

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminum Track in Johannesburg?

Aluminium Window Frames Details

Greenhouse kit frames may be made of galvanized steel pipe, aluminum, plastic or wood. It is very important when considering purchasing a greenhouse to look at the type of frame it is constructed of. There are also many different grades of these materials used. With the steel pipe frame you not only have to consider the size of the tubing, but also the spacing of the tubing. Naturally, closer spacing of the bows will result in a stronger frame. This is also true of aluminum frames. The thickness of the aluminum, the spacing and the extra supports will all determine the strength. What type of wood is being used is very important also.

Typically the prices going from low to high will be as follows.

1. Plastic frames
2. Lightweight Aluminum Frames
3. Pipe Frames
4. Wood Frames
5. Heavy Duty Aluminum Frames

Some of these such as the wood frames will require maintenance to keep up. The rest of the frame types are typically maintenance free.

Many consumers simply look at size, shape and price and do not consider that at some point they will probably want to add some accessories such as circulating fans, ventilation systems, hanging heaters, misting or fogging systems, etc. to their greenhouse. With plastic frames it is virtually impossible to add any accessories without building a frame to mount the accessories to. Many times these frames simply are not heavy enough to support even a hanging basket. Usually with wood and pipe frames the strength is there, but you will still need to do some extra framing out to mount the accessories. There are also some lighter weight aluminum frame greenhouse kits which will require additional framing to mount your accessories. Most quality aluminum framed greenhouses will offer a channel where bolts will slide to the exact location you desire to put your accessories. Usually this type of frame will even make it possible to add a wire shelf above your benches for extra space.

These are all just general guidelines. It is best to investigate each greenhouse kit on an individual basis.

Greenhouse Kit Frames

Aluminium Window Frames Details

Extrusion is the process to change the structure and shape of different metals. Some of the metals that are commonly extruded include aluminium, copper, lead, magnesium, zinc, titanium etc.

As aluminium is malleable in nature, it is easy to extrude. Specific dies are used for the aluminium extrusion process. These steel dies have opening of the desired shapes. Primarily, this process can be of two types - hot and cold. For hot process, precise heating is very important. It is done above the aluminium's recrystallization temperature. While, cold process is done at room temperature or near room temperature.

To obtain superior quality and improved surface finished aluminium extrusions, accurate temperate and its monitoring is vital. The finishing increases the durability, strength and its appearance. In the process, a billet is heated at the temperature of 400 C to 500 C and is pushed through the die under pressure to create preferred profiles. The shape, structure and specifications vary according to the requirements of the product, customers and its application.

The company's manufacturing aluminium extrusions prefer extrusion process over welding as it gives product with constant cross section. The strength and lightweight (strength-to-weight ratio) of this metal makes it popular among customers. Its several other properties gives it edge over other metals. These are cost-effective, corrosion-resistive, flexible and durable.

The prime source of aluminium is bauxite ore and Feldspar to some extent. Some of the fields where the this metal's extruded shapes are used include transportation, building and construction to name a few.

Aluminium Window Frames Details

 


https://ferngully.co.za/list/

Fern Gully Have Aluminum Track Channel List

Aluminum Track Popular

Aluminum is one of the most used metals in today’s society – Aluminum Track in Popular  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusions Retail it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Sections Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Alspec Aluminium Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusion Framing Components the drawing process is skipped.

Aluminium Window Frames Details

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminum Track in Popular?

Aluminium Windows

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

How to Choose Quality Aluminum Windows and Doors

Aluminium Window Sections Catalogue

When double glazing first became a popular window choice in the 1960s, most frames were made of aluminum. Aluminum remained the most popular choice for framing double glazing windows through the mid-1980s, when it held over 60% of the market. Since the introduction of PVC window framing, the market share of aluminum framed windows has dropped steadily. As of 2003, less than 17% of windows sold were aluminum framed. There are many reasons for the drop in popularity - and still some good reasons for choosing aluminum over PVC or wood frames.

The early popularity of aluminum was based on price and convenience. Aluminum was far less expensive than wood, the only other choice for window framing in the early years of double glazing. In addition, aluminum is easily extruded in the shapes and lengths needed to frame windows of any shape or size. It's strong, durable and very close to maintenance free.

Aluminum frames do have one significant drawback, however. Aluminum is an excellent conductor of heat and cold. It's such a good conductor, in fact, that in colder temperatures, frost often forms on interior surfaces of the windows close to the aluminum joints. The end result is windows that are significantly less able to conserve heat and energy than those framed in other materials.

PVCu was introduced in the mid-80s as a choice for framing double glazing windows, and immediately began to climb in popularity. When compared with aluminum frames, PVCu was less expensive, and more energy conservative. It can't match the strength of aluminum, however, and there are security concerns with its use. In addition, the introduction of 'thermal breaks' reduces the heat conductivity (measured in U values) of aluminum framed windows significantly. By fitting a less conductive material between the panes of the window as a sort of 'bridge' between the glass, manufacturers can bring the U value of aluminum framed double glazed windows within conservation standards.

The main selling points for aluminum window frames, then, were:

1. Strength - aluminum framed windows are far less prone to warping. The aluminum withstands weather well, needs no painting and forms strong, rigid window frames that will fit for far longer than wood frames.

2. Cost - aluminum frames are far less expensive than wood frames. They are easier to manufacture, and the material is less expensive to begin with. On the other hand, the introduction of PVC has largely negated the advantage of cost. Far lower in price, and with more efficient heating, PVC has become the material of choice for framing double glazing windows.

3. Ease of maintenance - As opposed to wood, which is subject to warping and decay and needs repainting every 3-5 years, aluminum is virtually maintenance free. It never needs painting, doesn't rot or warp, and is rigid and strong enough to bear the load of window lintels with minimal reinforcement.

4. Security - Because of the tight fit possible with aluminum framed double glazed windows, they were - and still are - the choice where security is a paramount concern. It's very difficult to 'pop' an aluminum framed window from its frame if it's properly fitted.

Aluminium Windows Pretoria

 


https://ferngully.co.za/list/

Fern Gully Have Aluminum Track Channel List