Clip On Aluminium Profiles Most Popular

Aluminum is one of the most used metals in today’s society – Clip On Aluminium Profiles in Most Popular  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows Cape Town

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusion Framing Components it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Window Frame Extrusions the drawing process is skipped.

Aluminium Window Frames Details

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Clip On Aluminium Profiles in Most Popular?

Aluminium Sections Catalogue

Greenhouse kit frames may be made of galvanized steel pipe, aluminum, plastic or wood. It is very important when considering purchasing a greenhouse to look at the type of frame it is constructed of. There are also many different grades of these materials used. With the steel pipe frame you not only have to consider the size of the tubing, but also the spacing of the tubing. Naturally, closer spacing of the bows will result in a stronger frame. This is also true of aluminum frames. The thickness of the aluminum, the spacing and the extra supports will all determine the strength. What type of wood is being used is very important also.

Typically the prices going from low to high will be as follows.

1. Plastic frames
2. Lightweight Aluminum Frames
3. Pipe Frames
4. Wood Frames
5. Heavy Duty Aluminum Frames

Some of these such as the wood frames will require maintenance to keep up. The rest of the frame types are typically maintenance free.

Many consumers simply look at size, shape and price and do not consider that at some point they will probably want to add some accessories such as circulating fans, ventilation systems, hanging heaters, misting or fogging systems, etc. to their greenhouse. With plastic frames it is virtually impossible to add any accessories without building a frame to mount the accessories to. Many times these frames simply are not heavy enough to support even a hanging basket. Usually with wood and pipe frames the strength is there, but you will still need to do some extra framing out to mount the accessories. There are also some lighter weight aluminum frame greenhouse kits which will require additional framing to mount your accessories. Most quality aluminum framed greenhouses will offer a channel where bolts will slide to the exact location you desire to put your accessories. Usually this type of frame will even make it possible to add a wire shelf above your benches for extra space.

These are all just general guidelines. It is best to investigate each greenhouse kit on an individual basis.

Porch Railing Materials

Aluminium Sections Catalogue

Aluminum is a non-ferrous metal (which means it will not draw a magnet) that is lightweight. There are several different grades of scrap aluminum, and all of them vary in price. At most scrapyards, aluminum is broken down into the following grades:

Cast Aluminum

Radiators (clean and contaminated)

Extrusions (clean and contaminated)

Wheels (Clean and Chrome Plated)

Siding

Aluminum/Copper Radiators (clean and contaminated)

Old Sheet

Cast aluminum is very brittle and when broken, the inside will appear very grainy. A majority of the cast aluminum that comes across our scale is from auto parts. Transmission housings, engine cylinder heads, and electronic covers are all examples of cast aluminum auto parts. Other miscellaneous items that are made of cast aluminum include BBQ covers, some hot plates and skillets, and some light housings.

Aluminum radiators can be brought to our yard in two forms, contaminated or clean. A clean aluminum radiator must have all tanks, hoses, and steel and plastic removed. The plastic tanks on each end of the radiator will typically contain steel, sometimes however they will contain a tube made of aluminum or brass.

Extrusion is the process of pushing material through a die to give it a particular shape, very much like a Play-Doh spaghetti machine. The most common form of aluminum extrusion we see is window frames, but it is used very often in other framing systems and structural applications. Extrusions are broken down into contaminated and clean grades, with clean extrusion containing no steel, plastic, rubber, or insulation.

Aluminum Wheels come in two varieties, aluminum and chrome plated aluminum. Chrome plated wheels are worth a little less than pure aluminum due to the chrome contamination. Wheels with plastic face covers are also considered chrome plated due to the contamination of plastic and glue. Our listed wheel price assumes wheel weights, valve stems, and center caps are still attached. If these have been removed from your wheels discuss it with our scale operator and he may be able to increase your price.

Aluminum siding also includes gutters, downspouts, and other flat stock aluminum items. To receive the aluminum siding price, the material must not contain steel, Styrofoam, tar, insulation or any other contamination.

Aluminum/copper radiators are found in air conditioning units. They are copper tubes surrounded by aluminum fins. A clean aluminum/copper radiator will contain no steel flanges. If the steel flanges are cut off of a dirty aluminum/copper radiator, the rest of the radiator can be sold as clean and the flanges can be sold as aluminum breakage if they still contain some aluminum and copper.

Old sheet is the lowest grade of scrap aluminum and just about everything that has not been mentioned so far falls into this category. Some common aluminum sheet items include pots and pans, pop cans, lawn chairs, and screens. Siding containing excessive Styrofoam or tar will also be bought as aluminum sheet.

Aluminium Windows

https://ferngully.co.za/rating/

Fern Gully Have Aluminium Profile List

Clip On Aluminium Profiles Tips

Aluminum is one of the most used metals in today’s society – Clip On Aluminium Profiles in Tips  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Alspec Aluminium Catalogue

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Cabinet Frame Extrusions it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Frames For Sale

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Flat Aluminum Extrusions the drawing process is skipped.

Alspec Aluminium Catalogue

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Clip On Aluminium Profiles in Tips?

Alspec Aluminium Catalogue

Having lived with all three types of windows and patio doors in the past three years, I feel that I am an 'expert user' when it comes to opening and closing in each medium: wood, pvc and aluminium.

First, the novice's choice: wood. It looks great, feels warm, can be stained a medium or dark shade or painted any colour of the spectrum. It's an age-old medium so what can go wrong? The main problems are humidity and strong sunlight.

There are varying qualities of wood on offer, depending on your budget. A moderately-priced pair of French doors on a south-facing house wall suffered a degree of warping, creating gaps that had to be plugged each winter in an attempt to keep the cold draughts at bay whereas, in warmer damp circumstances, the door had to be forcibly pushed and pulled back into its aperture.

Two good summers and the four coats of varnish had virtually vapourised, revealing cracking wood that needed nourishing and protecting from the next couple of years' weather.

Second, the double-glazing salesman's special offer: PVC. Overpriced by a couple of well-known companies who then discount by 50% if you hesitate, PVC is also available in varying qualities. At the higher end of the market, the frames are often reinforced with metal.

Generally with more features than wooden doors and windows, PVC should not require much more than a quick wipe with a damp cloth for the first few years and its looks are therefore easier to maintain. We have some PVC French Doors from the lower price range. As value for money, they are quite good but an element of trust is lacking in terms of defence against determined intruders. They feel floppy and flimsy when opening and closing and there's a knack to locking and unlocking them successfully. We have older PVC doors from the higher price range and, whilst more sturdy (reinforced with metal) they are looking a tad ratty.

The PVC windows screeched with wind whistling through, like semi-detached tinnitus.

Thirdly and finally, the long term investment: powder-coated aluminium frames. If you are fed up with sanding down wooden frames and considering the easy option of PVC or coated aluminium, particularly for a wide opening with multi-folding doors. Consider whether PVC is up to the task of substituting for the wall of your house.

Stand back and look through closed doors at the difference between PVC and aluminium - it is very noticeable. With PVC, there are windows of scenery between wide areas of plastic (two frames together might measure between 8 and 10 inches, 20 to 25cms) so the doors block up to 20 per cent of the potential view and light-source.
 
Aluminium frames on bifolding doors from manufacturer SunSeeker Doors, being stronger, are only about 2 inches or 5 centimeters. The profile is also considerably smaller so the doors use far less space than PVC or wood when folded back. For those who want color, several options are available to order, the most popular (after standard white) are: Grey, blue, green, brown and silver. Aluminium Frames are more expensive than cheap PVC or wood but prices are comparable with the better quality PVC doors. Is aluminum worth the extra cost? If you want the "wow" factor, strength, longevity, maximum living space and the most panoramic view,Yes.

Aluminium Extrusion Manufacturing Process

Aluminium Window Frames Catalogue

Aluminum doors are a popular choice for commercial properties adding strength and durability and reducing the risk of the door being broken down. While these may seem a great choice, especially from modern buildings, they do offer their own advantages and disadvantages that you need to be aware of.

Aluminum doors come with a host of advantages, which is what makes them such a popular choice in the commercial and industrial industries. These are also increasing in popularity in modern homes, where homeowners are looking to add that industrial chic to their finished design.

One of the biggest advantages to this option is the stability, strength and durability that these doors provide. Aluminum is exceptionally strong and this is displayed by the quality and strength of these products, which can last for many years, often outlasting many of the other materials available on the market today.

They work exceptionally well in buildings which have already incorporated aluminum windows, blending the two together to create a beautifully finished building that will stand the test of time.

Another advantage to these products is their ability to stand up in any weather conditions. It doesn't matter if you are based in the heart of the dessert or on the coast, which is constantly plagued by sea air. These products are weatherproof and strong and can handle vast temperature changes without signs of wear and tear.

You will find that aluminum doors are available from most suppliers, which is always a huge advantage. They can be found in most suppliers around the world and do not require that you hunt for them. If you have already chosen this material for your entry, then you should be able to find a reputable supplier who can supply and install the product for you in the shortest space of time.

Only in cases where the door is custom made will this process take longer, but in the majority of cases the supplier will have a number of doors in various sizes readily available and just waiting to be installed.

A huge advantage for any business owners is to know that their door won't require much maintenance over the years. The good news is that aluminum doors don't rust, so they are ideal in any climate, especially those that are close to the sea. Salty air can be exceptionally damaging, but these products are treated ensuring that they can withstand anything that is thrown their way.

Everything available on the market comes with some disadvantages and aluminum doors are no different. There are some cons to using these products over the other materials available on the market.

One of the disadvantages is that they tend to stain from constant water. If your building is in a very wet area which sees a lot of rain, you can expect some marks which will increase over time. While the product won't rust, the marks can be rather unsightly, so this needs to be taken into consideration when making a final decision on whether these are the right choice for your business or building.

Another disadvantage is that these can be more expensive that the other products available on the market. The metal prices are constantly fluctuating which makes it exceptionally difficult to budget until you have the product on order.

Most suppliers will be able to give you a final price when you ask for an estimate. Also bear in mind that because these are such high quality doors, they do require specialist installers who have experience with these products, ensuring they are installed to the highest standard.

Choosing someone to handle the installation that aren't knowledgeable on aluminum doors can result in you having to call out a repair company much sooner than anticipated.

Aluminium Window Frames Catalogue

https://ferngully.co.za/rating/

Fern Gully Have Aluminium Profile List

Clip On Aluminium Profiles Sandton

Aluminum is one of the most used metals in today’s society – Clip On Aluminium Profiles in Sandton  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusion Corner Profiles it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Alspec Aluminium Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows Pretoria

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Extruded Window Frame the drawing process is skipped.

Aluminium Windows Cape Town

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Clip On Aluminium Profiles in Sandton?

Aluminium Window Frames Catalogue

Having lived with all three types of windows and patio doors in the past three years, I feel that I am an 'expert user' when it comes to opening and closing in each medium: wood, pvc and aluminium.

First, the novice's choice: wood. It looks great, feels warm, can be stained a medium or dark shade or painted any colour of the spectrum. It's an age-old medium so what can go wrong? The main problems are humidity and strong sunlight.

There are varying qualities of wood on offer, depending on your budget. A moderately-priced pair of French doors on a south-facing house wall suffered a degree of warping, creating gaps that had to be plugged each winter in an attempt to keep the cold draughts at bay whereas, in warmer damp circumstances, the door had to be forcibly pushed and pulled back into its aperture.

Two good summers and the four coats of varnish had virtually vapourised, revealing cracking wood that needed nourishing and protecting from the next couple of years' weather.

Second, the double-glazing salesman's special offer: PVC. Overpriced by a couple of well-known companies who then discount by 50% if you hesitate, PVC is also available in varying qualities. At the higher end of the market, the frames are often reinforced with metal.

Generally with more features than wooden doors and windows, PVC should not require much more than a quick wipe with a damp cloth for the first few years and its looks are therefore easier to maintain. We have some PVC French Doors from the lower price range. As value for money, they are quite good but an element of trust is lacking in terms of defence against determined intruders. They feel floppy and flimsy when opening and closing and there's a knack to locking and unlocking them successfully. We have older PVC doors from the higher price range and, whilst more sturdy (reinforced with metal) they are looking a tad ratty.

The PVC windows screeched with wind whistling through, like semi-detached tinnitus.

Thirdly and finally, the long term investment: powder-coated aluminium frames. If you are fed up with sanding down wooden frames and considering the easy option of PVC or coated aluminium, particularly for a wide opening with multi-folding doors. Consider whether PVC is up to the task of substituting for the wall of your house.

Stand back and look through closed doors at the difference between PVC and aluminium - it is very noticeable. With PVC, there are windows of scenery between wide areas of plastic (two frames together might measure between 8 and 10 inches, 20 to 25cms) so the doors block up to 20 per cent of the potential view and light-source.
 
Aluminium frames on bifolding doors from manufacturer SunSeeker Doors, being stronger, are only about 2 inches or 5 centimeters. The profile is also considerably smaller so the doors use far less space than PVC or wood when folded back. For those who want color, several options are available to order, the most popular (after standard white) are: Grey, blue, green, brown and silver. Aluminium Frames are more expensive than cheap PVC or wood but prices are comparable with the better quality PVC doors. Is aluminum worth the extra cost? If you want the "wow" factor, strength, longevity, maximum living space and the most panoramic view,Yes.

Aluminum Frames Vs PVC Or Wood - Are They Worth the Extra Cost?

Alspec Aluminium Catalogue

Aluminum doors are once popular in the home building industry. With the changes in architectural taste, however, many people opted for different styles of sliding doors. Nonetheless, even when the interest in this type of door has already declined, it still has various advantages that could not be provided by other types of doors.

For one, aluminum pocket doors are great space savers. They could be used in several instances when space is an issue. For example, a room which could not be fixed with a hinge door could make use of a pocket door. This is the case when there is a permanent obstruction along the pathway where the door swings. Since the door runs along a hidden track and vanishes inside a pocket in the wall, there is no longer a need to open the door fully by swinging. Thus, the door does not require more space before it could be opened. Also, a pocket door could effectively replace a standard door when there is no other way but hide the door inside the walls.

Aluminum sliding doors is also a great alternative to ordinary wood, vinyl or plastic doors. This is because the doors are predicted to capture the future trend in home designing alongside glass and other metals.

There are downsides to using the doors though. For one, these doors could not be used in places where there are extreme temperatures as aluminum tends to adopt to the temperature of its surrounding. This would not help neutralize the heat or the coldness inside a room, for example. Also, aluminum, unlike wood, glass and fiberglass doors, tends not to blend in with most architectural design. For instance, the doors would not work well with Victorian-style inspired homes. They are, however, common among conventional houses where steal panels and other metals are used in decorating the house.

Also, one cannot really play well with colors on the doors. Usually, homeowners have to settle with the metallic look. This doesn't say that the natural aluminum surface is not good. In fact it is. However, for people who are fond of playing with colors, the doors may not be the best choice.

Another drawback to using the doors is that they tend to catch the atmosphere of large kitchens since they are usually associated with the kitchen doors of most restaurants. But again, this may not be as bad at all since many people actually love to create a certain atmosphere in their kitchen that may only be contributed to metals.

A change of look is what a sliding door could give when used in residential homes. In the industrial settings however, they have become the mainstay.

Aluminium Windows Cape Town

 


https://ferngully.co.za/rating/

Fern Gully Have Aluminium Profile List

Clip On Aluminium Profiles Guide

Aluminum is one of the most used metals in today’s society – Clip On Aluminium Profiles in Guide  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Window Frame Extrusion it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows South Africa

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusion Corner Profiles the drawing process is skipped.

Aluminium Windows South Africa

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Clip On Aluminium Profiles in Guide?

Aluminium Windows

Aluminum doors are once popular in the home building industry. With the changes in architectural taste, however, many people opted for different styles of sliding doors. Nonetheless, even when the interest in this type of door has already declined, it still has various advantages that could not be provided by other types of doors.

For one, aluminum pocket doors are great space savers. They could be used in several instances when space is an issue. For example, a room which could not be fixed with a hinge door could make use of a pocket door. This is the case when there is a permanent obstruction along the pathway where the door swings. Since the door runs along a hidden track and vanishes inside a pocket in the wall, there is no longer a need to open the door fully by swinging. Thus, the door does not require more space before it could be opened. Also, a pocket door could effectively replace a standard door when there is no other way but hide the door inside the walls.

Aluminum sliding doors is also a great alternative to ordinary wood, vinyl or plastic doors. This is because the doors are predicted to capture the future trend in home designing alongside glass and other metals.

There are downsides to using the doors though. For one, these doors could not be used in places where there are extreme temperatures as aluminum tends to adopt to the temperature of its surrounding. This would not help neutralize the heat or the coldness inside a room, for example. Also, aluminum, unlike wood, glass and fiberglass doors, tends not to blend in with most architectural design. For instance, the doors would not work well with Victorian-style inspired homes. They are, however, common among conventional houses where steal panels and other metals are used in decorating the house.

Also, one cannot really play well with colors on the doors. Usually, homeowners have to settle with the metallic look. This doesn't say that the natural aluminum surface is not good. In fact it is. However, for people who are fond of playing with colors, the doors may not be the best choice.

Another drawback to using the doors is that they tend to catch the atmosphere of large kitchens since they are usually associated with the kitchen doors of most restaurants. But again, this may not be as bad at all since many people actually love to create a certain atmosphere in their kitchen that may only be contributed to metals.

A change of look is what a sliding door could give when used in residential homes. In the industrial settings however, they have become the mainstay.

Replacing Aluminum Frame Single Pane Windows

Aluminium Window Frames Catalogue

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

Aluminium Windows

 


https://ferngully.co.za/rating/

Fern Gully Have Aluminium Profile List