Extrusion Aluminium Guide

Aluminum is one of the most used metals in today’s society – Extrusion Aluminium in Guide  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusions For Sale it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows Cape Town

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Storm Window Frame Extrusions the drawing process is skipped.

Aluminium Windows

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Extrusion Aluminium in Guide?

Alspec Aluminium Catalogue

Having lived with all three types of windows and patio doors in the past three years, I feel that I am an 'expert user' when it comes to opening and closing in each medium: wood, pvc and aluminium.

First, the novice's choice: wood. It looks great, feels warm, can be stained a medium or dark shade or painted any colour of the spectrum. It's an age-old medium so what can go wrong? The main problems are humidity and strong sunlight.

There are varying qualities of wood on offer, depending on your budget. A moderately-priced pair of French doors on a south-facing house wall suffered a degree of warping, creating gaps that had to be plugged each winter in an attempt to keep the cold draughts at bay whereas, in warmer damp circumstances, the door had to be forcibly pushed and pulled back into its aperture.

Two good summers and the four coats of varnish had virtually vapourised, revealing cracking wood that needed nourishing and protecting from the next couple of years' weather.

Second, the double-glazing salesman's special offer: PVC. Overpriced by a couple of well-known companies who then discount by 50% if you hesitate, PVC is also available in varying qualities. At the higher end of the market, the frames are often reinforced with metal.

Generally with more features than wooden doors and windows, PVC should not require much more than a quick wipe with a damp cloth for the first few years and its looks are therefore easier to maintain. We have some PVC French Doors from the lower price range. As value for money, they are quite good but an element of trust is lacking in terms of defence against determined intruders. They feel floppy and flimsy when opening and closing and there's a knack to locking and unlocking them successfully. We have older PVC doors from the higher price range and, whilst more sturdy (reinforced with metal) they are looking a tad ratty.

The PVC windows screeched with wind whistling through, like semi-detached tinnitus.

Thirdly and finally, the long term investment: powder-coated aluminium frames. If you are fed up with sanding down wooden frames and considering the easy option of PVC or coated aluminium, particularly for a wide opening with multi-folding doors. Consider whether PVC is up to the task of substituting for the wall of your house.

Stand back and look through closed doors at the difference between PVC and aluminium - it is very noticeable. With PVC, there are windows of scenery between wide areas of plastic (two frames together might measure between 8 and 10 inches, 20 to 25cms) so the doors block up to 20 per cent of the potential view and light-source.
 
Aluminium frames on bifolding doors from manufacturer SunSeeker Doors, being stronger, are only about 2 inches or 5 centimeters. The profile is also considerably smaller so the doors use far less space than PVC or wood when folded back. For those who want color, several options are available to order, the most popular (after standard white) are: Grey, blue, green, brown and silver. Aluminium Frames are more expensive than cheap PVC or wood but prices are comparable with the better quality PVC doors. Is aluminum worth the extra cost? If you want the "wow" factor, strength, longevity, maximum living space and the most panoramic view,Yes.

Scrap Aluminum Grades - How to Sort and Clean Scrap Aluminum to Maximize Its Value

Aluminium Window Frames For Sale

Metal fabrication equipment is used in important facets of the manufacturing industry. It serves the structural steel industry very well as it helps in other metal fabricating industries. Producers of this equipment have clients ranging from small and medium size enterprises to iron and fabricating shops and large construction companies.

The most common types of metal fabrication equipment include hydraulic press brakes, pinch rolls, plate shears, bending machines, tube benders and plate rolls. All these machines will help the entire workload easier. Look into the features of these types of equipment.

Hydraulic press brakes

Hydraulic press brakes are created to deliver the kind of ease and comfort an operator is looking for in the product. They are equipped with a ram system to provide maximum efficiency on operator control. Down stroking ram systems are favored over up stroking systems because they lessen operator fatigue. The system with a thick ram makes it easier to move in between extra heavy frames. Alongside with this component, a steel torsion is also utilized. At times, the hydraulic press brake contains limit switches and overload protection systems. Speeds of the press brakes are adjustable and controllable as well.

Hydraulic shears

This is yet another type of metal fabrication equipment used in order to make the job of individuals easier. Looking for those with foot pedals and emergency stops is highly favorable for the company. Programmable axes may help control blade gaps, stroke length, back gauge and shearing times. At times, the shears are also commendable for its capacity to transfer balls and load metal sheets. It also possesses a full protection guard system. Shears are used in order to provide smooth and quiet operation while cutting or manufacturing metal parts.

Plate bending machines

Plate bending machines vary according to specifications of the particular industry making use of this industrial product. There are goods that are best suited for small to medium production requirement for pipes, angles, flats and tubes. Ornamental and job shops will surely favor this type of bending machine. There are plate bending machines that are versatile enough with hydraulic forming features. This is commendable in industries were pipe, tube and aluminum extrusion bending is required.

There are other types of metal fabrication equipment sold by a lot of manufacturers. At times, this equipment may be available from second hand machine stores. What matters is that the machine will work for the particular manufacturing process it has to serve.

Aluminium Windows South Africa

https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List

Extrusion Aluminium Rating

Aluminum is one of the most used metals in today’s society – Extrusion Aluminium in Rating  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Alspec Aluminium Catalogue

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusion Framing it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Window Frames Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Sections Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminium Frame Company the drawing process is skipped.

Aluminium Window Frames Catalogue

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Extrusion Aluminium in Rating?

Aluminium Window Frames Catalogue

The process of aluminum extrusion is simple and easy however it is very significant to know why extrusion is so important. In general metals like steel and aluminum is put to use in several industries, right from automobile, to telecommunication, transport, utensil manufacturing and at times even in the toy industry. Thus, both of these metals are in huge demand and find place is almost all the major manufacturing industries in the world.

Just after steel, aluminum is the other metal which is hugely popular all over the world. This can put in a manner stating that aluminum is the second most popular metal in the globe after steel. The former is widely available, has impressive properties, and is affordable, light weight, can withstand high temperatures and so on. And above all the aluminum extrusion involved in getting different shapes and forms for suppliers is cost-effective and simple. Both in US and Europe building industry and the telecom as well is highly dependent on aluminum extruded products. These products find a number of usages and are used in many applications.

So, what is aluminum extrusion? This is a process through which aluminum is given certain shapes and forms. It starts with the hot cylindrical billet of aluminum which is pushed through a shaped die. The billet is cut from DC cast log and placed in heated container (450°C - 500°C). When pushed through the die the metal flows through the steel die. The die is placed at the other end of the container. Now, once the log passes it produces a section, this can be cut into shapes either in long length or short. The section is cuts according to the customized demands of the clients since the log is meant to be used for any particular industry. In certain extrusion process rectangular shaped billets. In this process only wide section sized extrusions are produced. This again depends according the demands of the supplier.

Aluminum extrusion is done for several kinds of industry and these aluminum extruded products are very commonly used in building industry. In this industry you can use aluminum in prefabricated houses/building structures, window and door frame systems, curtain walling, roofing and exterior cladding, and shop fronts. Besides, they also find place in the telecommunication and transport industry. In transport industry aluminum extruded products are found in rail vehicles, marine applications, airframes and for vehicles on the road.

So, what makes aluminum so popular? It is the versatility and the flexibility of the material that turns in so popular. Since aluminum is high temperature resistance and is corrosion resistant as well it is used to make utensils and is also used on transport vehicles. Besides, it is strong even though it is light weight and thus it is used in airframes.

So, if you are out there still deciding on selecting aluminum extruded products or some other metal you can give your votes to this metal as it is affordable and durable as well. No more second thoughts to this go ahead with aluminum extrusion and the products.

Automatic Sliding Aluminum Doors

Alspec Aluminium Catalogue If you have a wonderful house with a great view of your garden or picture-postcard scenery spread gorgeously in front then you need doors that give an unimpeded view.
Consider the standard options like sliding doors. A part of the opening will always remain covered regardless of whether you use two partitions or three partitions. French doors simply do not suit large openings. The answer is custom bifold doors especially when the opening is large and an unrestricted view is desired. They save space and give an unhindered view of the exteriors.
The term bifold doors may be a misnomer since these doors are, in effect, made up of several panels that fold together like an accordion or concertina into a compact bunch of panels that do not take up much space and stay neatly on one side of the opening. You have a clear view. Standard panel sizes may range from 24 to 36 inches in width or customized to suit the width of the openings, which could be a better option in some cases. Custom bifold doors can help save space and the use of matching hardware means it will be a joy to operate.
Customization could take several forms. You can choose to have bifold doors with narrow or broader panels to suit design considerations and aesthetics of how the door will look when fully closed. Narrow panels do give a nice look but in some cases one may wish for a less obstructed view in which case broader panels serve the purpose. Cost will also vary. Obviously more panels lead to higher cost but the advantage is that opening and closing the bifolds will be easier when the door has narrow panels and they take up less space.
Where there are doors with glass the question of curtains or blinds always comes up. Here again customization helps when you choose double glazing panels with inbuilt blinds that are totally sealed within and can be opened or closed by sliding a magnetic latch. Such integrated bifold doors also help save space and present a neater appearance. Then there are small details that the installer and manufacturer will take care of such as using quality sliding tracks, pivots and hinges that integrate seamlessly into the aluminum frame. Another matter that necessitates customization is whether to place the track at the top or bottom. It is best to consult a reputed door supplier and installer and get a site inspection in order to get a customized fitting.
Bifold doors are not meant just as a partition between indoors and outdoors. They can also be used indoors to good effect as space savers between rooms. One can have a larger opening without the inconvenience of large door panels creating obstructions in confined spaces.
Bifold doors have several advantages such as ease of use, complete opening up of a room to the outside, security with the right set of hardware and energy efficiency. These advantages can be further enhanced by customizing the bifold panels along with glazing and hardware fittings. Aluminium Sections Catalogue

https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List

Extrusion Aluminium Gauteng

Aluminum is one of the most used metals in today’s society – Extrusion Aluminium in Gauteng  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows Pretoria

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusions Online Store it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Alspec Aluminium Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Glazing Extrusions the drawing process is skipped.

Aluminium Windows South Africa

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Extrusion Aluminium in Gauteng?

Alspec Aluminium Catalogue

Aluminum is the preferred material for door and window frames due to its inherent structural and aesthetic properties. Doors and windows made of aluminum frames with glass glazing may look the same from a distance but take a closer look and the difference between quality product and one that is fabricated by a local fabricator becomes apparent. If you are investing in doors and windows it pays to buy only quality products.


Seamless integration of hardware with aluminum frame


The looks as well as performance of aluminum windows are dependent on and influenced by the way hardware is integrated into the frame. If the window has hinges then the way hinges are designed and fitted to the frame has a bearing on ease of opening and closing as well as reducing gaps and thereby preventing energy losses. Quality manufacturers design and manufacture their own hardware to go along with windows and doors.


Precision fabrication


Most general fabricators do not work to tight tolerances while fabricating frames from aluminum profiles. There can be gaps between joins and this can look unseemly and if the frame sections are not well aligned, closing and opening them becomes a chore. Quality manufacturers also include thermal breaks and a foam core that provide additional insulation.


Finish


Quality manufacturers offer aluminum in a variety of finishes such as natural anodized finish in various shades, metallic colours, permanent colour fast powder coating and woodgrain foil overlay for a natural look. You can go a step further and choose aluminum frames that have one colour finish for interiors and another on the exterior to match building facades.


Single or double or triple glazing?


When double glazed windows offer so many advantages there is little point in saving some money by choosing single glazing. Double or even triple glazing is better from energy conservation as well as acoustic insulation perspective. Some advanced manufacturers offer gas filled and totally sealed double glazing. You also have the choice of blinds integrated inside the glazing, which makes for a neater appearance and ease of use. When one talks about glazing, it must be kept in mind that glass varies widely. It is recommended to look for windows with low E internal glass and possibly toughened glass so that, in the event the glass breaks, the floor is not littered with glass shards. You can also select glass that is coated to reflect heat and thus reduce energy consumption.


How secure are the aluminum windows?


Quality manufacturers offer windows that conform to British Standards PAS 24:2012. Material, design and manufacture of the windows makes it difficult for would be burglars to force the windows. You should look for multipoint steel locking system and internal glazing for better security.


It pays to invest in world recognized brands offering quality aluminum windows. Windows look perfect from inside and from the outside. They will be easy to operate and you will enjoy their use for years with minimum maintenance. It may cost more initially but a quality aluminum window also adds to the value of your house.

Metal Fabrication Equipment - Examples of Machines Used in Various Industries

Aluminium Sections Catalogue

When double glazing first became a popular window choice in the 1960s, most frames were made of aluminum. Aluminum remained the most popular choice for framing double glazing windows through the mid-1980s, when it held over 60% of the market. Since the introduction of PVC window framing, the market share of aluminum framed windows has dropped steadily. As of 2003, less than 17% of windows sold were aluminum framed. There are many reasons for the drop in popularity - and still some good reasons for choosing aluminum over PVC or wood frames.

The early popularity of aluminum was based on price and convenience. Aluminum was far less expensive than wood, the only other choice for window framing in the early years of double glazing. In addition, aluminum is easily extruded in the shapes and lengths needed to frame windows of any shape or size. It's strong, durable and very close to maintenance free.

Aluminum frames do have one significant drawback, however. Aluminum is an excellent conductor of heat and cold. It's such a good conductor, in fact, that in colder temperatures, frost often forms on interior surfaces of the windows close to the aluminum joints. The end result is windows that are significantly less able to conserve heat and energy than those framed in other materials.

PVCu was introduced in the mid-80s as a choice for framing double glazing windows, and immediately began to climb in popularity. When compared with aluminum frames, PVCu was less expensive, and more energy conservative. It can't match the strength of aluminum, however, and there are security concerns with its use. In addition, the introduction of 'thermal breaks' reduces the heat conductivity (measured in U values) of aluminum framed windows significantly. By fitting a less conductive material between the panes of the window as a sort of 'bridge' between the glass, manufacturers can bring the U value of aluminum framed double glazed windows within conservation standards.

The main selling points for aluminum window frames, then, were:

1. Strength - aluminum framed windows are far less prone to warping. The aluminum withstands weather well, needs no painting and forms strong, rigid window frames that will fit for far longer than wood frames.

2. Cost - aluminum frames are far less expensive than wood frames. They are easier to manufacture, and the material is less expensive to begin with. On the other hand, the introduction of PVC has largely negated the advantage of cost. Far lower in price, and with more efficient heating, PVC has become the material of choice for framing double glazing windows.

3. Ease of maintenance - As opposed to wood, which is subject to warping and decay and needs repainting every 3-5 years, aluminum is virtually maintenance free. It never needs painting, doesn't rot or warp, and is rigid and strong enough to bear the load of window lintels with minimal reinforcement.

4. Security - Because of the tight fit possible with aluminum framed double glazed windows, they were - and still are - the choice where security is a paramount concern. It's very difficult to 'pop' an aluminum framed window from its frame if it's properly fitted.

Aluminium Windows South Africa

 


https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List

Extrusion Aluminium Johannesburg

Aluminum is one of the most used metals in today’s society – Extrusion Aluminium in Johannesburg  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Sections Catalogue

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Glass Frame Extrusion it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows Pretoria

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Sections Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusion Rail the drawing process is skipped.

Aluminium Windows Pretoria

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Extrusion Aluminium in Johannesburg?

Aluminium Windows

Having lived with all three types of windows and patio doors in the past three years, I feel that I am an 'expert user' when it comes to opening and closing in each medium: wood, pvc and aluminium.

First, the novice's choice: wood. It looks great, feels warm, can be stained a medium or dark shade or painted any colour of the spectrum. It's an age-old medium so what can go wrong? The main problems are humidity and strong sunlight.

There are varying qualities of wood on offer, depending on your budget. A moderately-priced pair of French doors on a south-facing house wall suffered a degree of warping, creating gaps that had to be plugged each winter in an attempt to keep the cold draughts at bay whereas, in warmer damp circumstances, the door had to be forcibly pushed and pulled back into its aperture.

Two good summers and the four coats of varnish had virtually vapourised, revealing cracking wood that needed nourishing and protecting from the next couple of years' weather.

Second, the double-glazing salesman's special offer: PVC. Overpriced by a couple of well-known companies who then discount by 50% if you hesitate, PVC is also available in varying qualities. At the higher end of the market, the frames are often reinforced with metal.

Generally with more features than wooden doors and windows, PVC should not require much more than a quick wipe with a damp cloth for the first few years and its looks are therefore easier to maintain. We have some PVC French Doors from the lower price range. As value for money, they are quite good but an element of trust is lacking in terms of defence against determined intruders. They feel floppy and flimsy when opening and closing and there's a knack to locking and unlocking them successfully. We have older PVC doors from the higher price range and, whilst more sturdy (reinforced with metal) they are looking a tad ratty.

The PVC windows screeched with wind whistling through, like semi-detached tinnitus.

Thirdly and finally, the long term investment: powder-coated aluminium frames. If you are fed up with sanding down wooden frames and considering the easy option of PVC or coated aluminium, particularly for a wide opening with multi-folding doors. Consider whether PVC is up to the task of substituting for the wall of your house.

Stand back and look through closed doors at the difference between PVC and aluminium - it is very noticeable. With PVC, there are windows of scenery between wide areas of plastic (two frames together might measure between 8 and 10 inches, 20 to 25cms) so the doors block up to 20 per cent of the potential view and light-source.
 
Aluminium frames on bifolding doors from manufacturer SunSeeker Doors, being stronger, are only about 2 inches or 5 centimeters. The profile is also considerably smaller so the doors use far less space than PVC or wood when folded back. For those who want color, several options are available to order, the most popular (after standard white) are: Grey, blue, green, brown and silver. Aluminium Frames are more expensive than cheap PVC or wood but prices are comparable with the better quality PVC doors. Is aluminum worth the extra cost? If you want the "wow" factor, strength, longevity, maximum living space and the most panoramic view,Yes.

Porch Railing Materials

Aluminium Windows

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

Alspec Aluminium Catalogue

 


https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List