Aluminium Handrail Extrusions Latest

Aluminum is one of the most used metals in today’s society – Aluminium Handrail Extrusions in Latest  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows South Africa

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusions Online Store it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Window Frames Details

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Frames Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Storm Window Frame Extrusions the drawing process is skipped.

Aluminium Window Sections Catalogue

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Handrail Extrusions in Latest?

Aluminium Window Frames For Sale

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

Greenhouse Kit Frames

Aluminium Windows Pretoria

Having lived with all three types of windows and patio doors in the past three years, I feel that I am an 'expert user' when it comes to opening and closing in each medium: wood, pvc and aluminium.

First, the novice's choice: wood. It looks great, feels warm, can be stained a medium or dark shade or painted any colour of the spectrum. It's an age-old medium so what can go wrong? The main problems are humidity and strong sunlight.

There are varying qualities of wood on offer, depending on your budget. A moderately-priced pair of French doors on a south-facing house wall suffered a degree of warping, creating gaps that had to be plugged each winter in an attempt to keep the cold draughts at bay whereas, in warmer damp circumstances, the door had to be forcibly pushed and pulled back into its aperture.

Two good summers and the four coats of varnish had virtually vapourised, revealing cracking wood that needed nourishing and protecting from the next couple of years' weather.

Second, the double-glazing salesman's special offer: PVC. Overpriced by a couple of well-known companies who then discount by 50% if you hesitate, PVC is also available in varying qualities. At the higher end of the market, the frames are often reinforced with metal.

Generally with more features than wooden doors and windows, PVC should not require much more than a quick wipe with a damp cloth for the first few years and its looks are therefore easier to maintain. We have some PVC French Doors from the lower price range. As value for money, they are quite good but an element of trust is lacking in terms of defence against determined intruders. They feel floppy and flimsy when opening and closing and there's a knack to locking and unlocking them successfully. We have older PVC doors from the higher price range and, whilst more sturdy (reinforced with metal) they are looking a tad ratty.

The PVC windows screeched with wind whistling through, like semi-detached tinnitus.

Thirdly and finally, the long term investment: powder-coated aluminium frames. If you are fed up with sanding down wooden frames and considering the easy option of PVC or coated aluminium, particularly for a wide opening with multi-folding doors. Consider whether PVC is up to the task of substituting for the wall of your house.

Stand back and look through closed doors at the difference between PVC and aluminium - it is very noticeable. With PVC, there are windows of scenery between wide areas of plastic (two frames together might measure between 8 and 10 inches, 20 to 25cms) so the doors block up to 20 per cent of the potential view and light-source.
 
Aluminium frames on bifolding doors from manufacturer SunSeeker Doors, being stronger, are only about 2 inches or 5 centimeters. The profile is also considerably smaller so the doors use far less space than PVC or wood when folded back. For those who want color, several options are available to order, the most popular (after standard white) are: Grey, blue, green, brown and silver. Aluminium Frames are more expensive than cheap PVC or wood but prices are comparable with the better quality PVC doors. Is aluminum worth the extra cost? If you want the "wow" factor, strength, longevity, maximum living space and the most panoramic view,Yes.

Aluminium Window Frames For Sale

https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List

Aluminium Handrail Extrusions Guide

Aluminum is one of the most used metals in today’s society – Aluminium Handrail Extrusions in Guide  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusions For Sale it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Alspec Aluminium Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Sections Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Flat Aluminum Extrusions the drawing process is skipped.

Aluminium Window Frames For Sale

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Handrail Extrusions in Guide?

Alspec Aluminium Catalogue

When building or renovating, people often consider the windows and doors last. After all, don't they all look the same apart from the sizes? And this is ironic when they cover nearly half of the total surface of the house. Whether you choose wooden, iron, concrete or aluminium doors and windows, the right choice can boost the value of the house, provide ample natural lighting, enhance the design and give a feeling of space. Apart from the design, there's also the issue of workability. This pertains to where your windows or doors will be located, how they open, and whether you need enough ventilation or if the door or window just serves their primary purpose.

Comparing Aluminium Vs.Wood

There's a distinct edge in choosing aluminium folding doors over timber and that's less maintenance over their expected lifecycle. You won't have to worry about termites or carpenter bees boring holes in your wooden door or window frames. When you require double glazing, for example, aluminium is the right choice as it is more pliant to accepting the additional embellishment. Make sure, however, to choose the right installers since come companies cutting corners and fail to apply waterproofing techniques which ultimately result to nagging soggy and clammy issues on the frames, window sills and doors.

Choosing the Right Material

Aluminium is also identified as less secure compared to wood but this is not the case when choosing the right company that can install a sliding security door in your home. You only need superior quality aluminium. Be wary about doped aluminium or the lower-grade aluminium alloy. Aluminium is graded according to the purity of the material. Ask the installer if the product passes national standards on thickness and yield strength. This can also be your legal remedy when the installer cuts on corners and install the wrong product. Apart from the practical issues, you also want to ensure the quality of the finished product. Windows and doors are supposed to enhance the look of your house so you don't focus on the functionality alone.

Price Points

The industry is brimming with installers of aluminium windows or folding doors and this is good for the consumers in the sense that competition drives prices down. Remember, the right windows and doors will look light on your home, introduce elegance, offer durability (which means less cost on maintenance), perfect for contemporary-style homes, and gives the appearance of space.

Solid Security Glass Block Windows & Walls For Commercial, Architectural and Institutional Projects

Alspec Aluminium Catalogue

Greenhouse kit frames may be made of galvanized steel pipe, aluminum, plastic or wood. It is very important when considering purchasing a greenhouse to look at the type of frame it is constructed of. There are also many different grades of these materials used. With the steel pipe frame you not only have to consider the size of the tubing, but also the spacing of the tubing. Naturally, closer spacing of the bows will result in a stronger frame. This is also true of aluminum frames. The thickness of the aluminum, the spacing and the extra supports will all determine the strength. What type of wood is being used is very important also.

Typically the prices going from low to high will be as follows.

1. Plastic frames
2. Lightweight Aluminum Frames
3. Pipe Frames
4. Wood Frames
5. Heavy Duty Aluminum Frames

Some of these such as the wood frames will require maintenance to keep up. The rest of the frame types are typically maintenance free.

Many consumers simply look at size, shape and price and do not consider that at some point they will probably want to add some accessories such as circulating fans, ventilation systems, hanging heaters, misting or fogging systems, etc. to their greenhouse. With plastic frames it is virtually impossible to add any accessories without building a frame to mount the accessories to. Many times these frames simply are not heavy enough to support even a hanging basket. Usually with wood and pipe frames the strength is there, but you will still need to do some extra framing out to mount the accessories. There are also some lighter weight aluminum frame greenhouse kits which will require additional framing to mount your accessories. Most quality aluminum framed greenhouses will offer a channel where bolts will slide to the exact location you desire to put your accessories. Usually this type of frame will even make it possible to add a wire shelf above your benches for extra space.

These are all just general guidelines. It is best to investigate each greenhouse kit on an individual basis.

Aluminium Windows

https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List

Aluminium Handrail Extrusions Popular

Aluminum is one of the most used metals in today’s society – Aluminium Handrail Extrusions in Popular  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Window Frames Details

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Glass Frame Extrusion it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows Cape Town

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Sections Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Structural Aluminum Extrusion the drawing process is skipped.

Aluminium Window Frames Catalogue

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Handrail Extrusions in Popular?

Aluminium Window Sections Catalogue

Aluminum is a non-ferrous metal (which means it will not draw a magnet) that is lightweight. There are several different grades of scrap aluminum, and all of them vary in price. At most scrapyards, aluminum is broken down into the following grades:

Cast Aluminum

Radiators (clean and contaminated)

Extrusions (clean and contaminated)

Wheels (Clean and Chrome Plated)

Siding

Aluminum/Copper Radiators (clean and contaminated)

Old Sheet

Cast aluminum is very brittle and when broken, the inside will appear very grainy. A majority of the cast aluminum that comes across our scale is from auto parts. Transmission housings, engine cylinder heads, and electronic covers are all examples of cast aluminum auto parts. Other miscellaneous items that are made of cast aluminum include BBQ covers, some hot plates and skillets, and some light housings.

Aluminum radiators can be brought to our yard in two forms, contaminated or clean. A clean aluminum radiator must have all tanks, hoses, and steel and plastic removed. The plastic tanks on each end of the radiator will typically contain steel, sometimes however they will contain a tube made of aluminum or brass.

Extrusion is the process of pushing material through a die to give it a particular shape, very much like a Play-Doh spaghetti machine. The most common form of aluminum extrusion we see is window frames, but it is used very often in other framing systems and structural applications. Extrusions are broken down into contaminated and clean grades, with clean extrusion containing no steel, plastic, rubber, or insulation.

Aluminum Wheels come in two varieties, aluminum and chrome plated aluminum. Chrome plated wheels are worth a little less than pure aluminum due to the chrome contamination. Wheels with plastic face covers are also considered chrome plated due to the contamination of plastic and glue. Our listed wheel price assumes wheel weights, valve stems, and center caps are still attached. If these have been removed from your wheels discuss it with our scale operator and he may be able to increase your price.

Aluminum siding also includes gutters, downspouts, and other flat stock aluminum items. To receive the aluminum siding price, the material must not contain steel, Styrofoam, tar, insulation or any other contamination.

Aluminum/copper radiators are found in air conditioning units. They are copper tubes surrounded by aluminum fins. A clean aluminum/copper radiator will contain no steel flanges. If the steel flanges are cut off of a dirty aluminum/copper radiator, the rest of the radiator can be sold as clean and the flanges can be sold as aluminum breakage if they still contain some aluminum and copper.

Old sheet is the lowest grade of scrap aluminum and just about everything that has not been mentioned so far falls into this category. Some common aluminum sheet items include pots and pans, pop cans, lawn chairs, and screens. Siding containing excessive Styrofoam or tar will also be bought as aluminum sheet.

Greenhouse Kit Frames

Aluminium Window Frames Details

Porch Railings - First And Lasting Impression

The porch railing is the first thing your visitors sees and in order that it makes a lasting impression, this article gives you tips for porch railings. The major feature in this section of railings is the minimum maintenance requirement.

The Form And Look - Essence Of Porch Railing

Since the porch is the first thing, a visitor observes after getting down from the car it always makes a lasting impression on the visitor. Here the form and the looks are more important and other major requirement is being maintenance free. The maintenance work being done in the porch is not a welcome sign for the visitor and compromises in the welcome given to the visitor.

Materials Used In Porch Railings

Materials have to be carefully selected for porch railings, workability is more important since the form, and looks are more important here. Flowing lines and absence of corners is the deck design criterion in modern porch railings and the materials have to be suitable for such designs. Most common materials are,

  1. Stainless Steel: Because of high workability and the fact that it maintains shine for a long time and that too in adverse conditions, stainless steel is the preferred material in porch railings. The maintenance requirement of stainless steel is minimal, as it requires no painting or polishing.
  2. PVC coated steel: The steel can be coated with PVC in multiple colors. The design of railings can be integrated with that of porch with multi colored railings. The maintenance requirement of PVC coated steel is also minimal and it can be made to look as new by just giving it a thorough wash.
  3. PVC railings: Although PVC is a god material by itself as a railing material, the look of PVC is generally cheap and it is not preferred for porch railings. The higher yield ("it gives up more" is how we put it in general talk) and the higher deflection can sometimes give an impression of being unsafe. Therefore, it is not used as material for porch railing.
  4. Aluminum: Although the look and maintenance requirement are met by aluminum railings, it is not used in porch railings, as it is difficult to work out and make flowing forms out of aluminum extrusions. Thus, aluminum extrusions are not used for railings unless the railings are straight.
Make your choice of material porch railings and make a good first impression on your visitor and it sure will last for a long time. Aluminium Windows South Africa

 


https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List

Aluminium Handrail Extrusions Recommended

Aluminum is one of the most used metals in today’s society – Aluminium Handrail Extrusions in Recommended  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows Cape Town

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminium Structural Framing it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Window Sections Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows Pretoria

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusion Rail the drawing process is skipped.

Aluminium Window Frames For Sale

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Handrail Extrusions in Recommended?

Aluminium Sections Catalogue

While aluminium is a very versatile material and aluminium doors can be suitably installed in a variety of indoor and outdoor contexts, two of the best places for the installation of aluminium doors are in industrial locations and as barriers between the inside and outside.

Aluminium doors are ideally suited to being installed as a barrier between indoor and outdoor environments because of their weatherproof and durable nature. This makes them a top choice for patio doors and café or bar doors leading to courtyards. Aluminium is one of best materials for patio door frames because the metal is a strong and very low-maintenance product. The advantages of installing aluminium framed doors as barriers between in and outdoors are largely due to the natural properties of the metal which make it resistant to corrosion as well as being impermeable and odourless. The aluminium framed doors do not rust and provide premium stability if installed correctly. Not only do doors of aluminium come in an extensive range of powder coated colours, they can also be carefully patterned for various aesthetic effects. Finally, aluminium framed doors are one of the best doors to be installed between interior and exterior because they won't warp or swell in damp conditions as wooden doors often do.

One of the second locations where doors of aluminium are best installed is in the heavy duty contexts of factories and warehouses where they are often the number one choice for a variety of applications. The popularity of aluminium doors in these environments is due again to the naturally strong, durable and low-maintenance nature of the metal. Aluminium is able to withstand any of the bumps and scrapes that are customary during the movement and transport of industrial machinery and products. Doors for industrial locations are made from large, high-strength metal panels that withstand the passage of oversize cargo and bulky machinery. Another reason why aluminium doors are such a top choice for heavy duty purposes is because the metal can be thermally treated to be scratch and dent resistant.

These are just too of the most popular locations for aluminium framed doors, but really, with such a versatile metal, the possible applications are endless. As well as providing a practical patio door and industrial door solution, glass and aluminium doors can be used inside the home in bathrooms and bedrooms as well as in the interiors or offices and other commercial constructions.

Aerospace Aluminium Alloys in Aircraft Skins

Alspec Aluminium Catalogue

In our past articles I talked about all the steps required to properly replace your old wood sash windows with energy efficient vinyl windows. I told you how to measure for the new windows. Then we discussed the removal of the wood sashes and parting bead. Finally, I told you how to install, seal, and trim the vinyl replacement windows. But, what if those old windows in your home are made of aluminum instead of wood? Is the process the same? No, it's not the same at all. So, the next few articles are going to explain the differences between replacing wood windows versus aluminum windows.

When discussing the proper frame style for replacing the wood sash windows, I explained the difference between new construction frames versus replacement frames. When replacing aluminum windows, there is another option we have to consider regarding frame style. It's called a "retrofit" frame. Let's go over each frame type. First, we have the new construction frame with the nailing fin. If you choose to go this route, you have to remove the exterior around each window opening, pull out the nails holding the aluminum window to the studs, nail in the new vinyl window, apply flashing, caulk, and re-install the exterior around each window.(I get tired just talking about it!)In addition to being a whole lot of labor, you can run into major problems trying to install the exterior product around each window opening. If your home has stucco, you have to try and match the rest of the stucco. It can be done, but not by you. Even most professional stucco guys can't get a perfect match. What if you have wood siding? Well, you can cut away 2" of the siding around each window to get to the nail fin, then you can apply 1 X 2 or 1 X 3 trim around each window. Certainly not as much work as the stucco home, but probably more work than the average homeowner cares to tackle. What if each window is surrounded by brick? Let's not even go there! You would have to remove the bricks, then re-install them all when finished.

Trust me, you don't want to replace your old aluminum windows with new construction vinyl windows. You want to use either the replacement frame like the one used to replace the wood sash windows, or something called a retrofit frame, that is popular in the west where stucco is a common exterior. Since the procedure for measuring is the same regardless of the frame style chosen, this article will discuss the proper measuring procedure, and future articles will explain the difference in the installation process for replacement versus retrofit.

If you look at the portion of the aluminum frame that goes around the window opening into your surrounding walls, you will see three separate "legs" that form two pockets. The outside leg and the center leg form the first pocket. Your screen and stationary panel will be in this pocket. The center leg and inside leg form the second pocket, and your sliding panel is in that pocket. Find the "leg" that is the widest on all four sides. When measuring the width, run your tape measure from the widest leg on the left to the widest leg on the right. This should be the narrowest measurement. Then, subtract 3/8" from that measurement. This is the width of the replacement window. Measure the height the same way. When measuring the height, measure as close to the center of the window as possible. This is especially important on windows wider than six feet, because the top wood header has a tendency to sag over time, making the center of the opening the narrowest. You don't need to deduct 3/8" from the height like you did on the width. 1/4" is fine. These are the dimensions you use when ordering your vinyl window. If you have any picture windows(windows without a vent panel), there will only be two legs and one pocket. You still measure the same way.

Next week I will discuss whether your home is a candidate for retrofit frames or replacement frames...

Aluminium Windows

 


https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List