Aluminium Window And Door Importers Tip

Aluminum is one of the most used metals in today’s society – Aluminium Window And Door Importers in Tip  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusions Online it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Window Sections Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Alspec Aluminium Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusion Slider the drawing process is skipped.

Aluminium Windows

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Window And Door Importers in Tip?

Aluminium Windows

Aluminum is one of the most used metals in today's society - it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

The manufacturer will begin by removing the aluminium from deep within the earth's crust (either as bauxite ore or feldspar). Often, the Bayer's method, Wohler's method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, the drawing process is skipped.

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Windows and Doors - Beautifying the House

Aluminium Window Frames Catalogue

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

Aluminium Window Frames For Sale

https://ferngully.co.za/guide-2/

Fern Gully Have Aluminium Windows And Doors List

Aluminium Window And Door Importers Most Popular

Aluminum is one of the most used metals in today’s society – Aluminium Window And Door Importers in Most Popular  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows Pretoria

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Extruded Window Frame it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Frames Details

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusions Online the drawing process is skipped.

Aluminium Window Frames Details

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Window And Door Importers in Most Popular?

Aluminium Windows Pretoria

The process of aluminum extrusion is simple and easy however it is very significant to know why extrusion is so important. In general metals like steel and aluminum is put to use in several industries, right from automobile, to telecommunication, transport, utensil manufacturing and at times even in the toy industry. Thus, both of these metals are in huge demand and find place is almost all the major manufacturing industries in the world.

Just after steel, aluminum is the other metal which is hugely popular all over the world. This can put in a manner stating that aluminum is the second most popular metal in the globe after steel. The former is widely available, has impressive properties, and is affordable, light weight, can withstand high temperatures and so on. And above all the aluminum extrusion involved in getting different shapes and forms for suppliers is cost-effective and simple. Both in US and Europe building industry and the telecom as well is highly dependent on aluminum extruded products. These products find a number of usages and are used in many applications.

So, what is aluminum extrusion? This is a process through which aluminum is given certain shapes and forms. It starts with the hot cylindrical billet of aluminum which is pushed through a shaped die. The billet is cut from DC cast log and placed in heated container (450°C - 500°C). When pushed through the die the metal flows through the steel die. The die is placed at the other end of the container. Now, once the log passes it produces a section, this can be cut into shapes either in long length or short. The section is cuts according to the customized demands of the clients since the log is meant to be used for any particular industry. In certain extrusion process rectangular shaped billets. In this process only wide section sized extrusions are produced. This again depends according the demands of the supplier.

Aluminum extrusion is done for several kinds of industry and these aluminum extruded products are very commonly used in building industry. In this industry you can use aluminum in prefabricated houses/building structures, window and door frame systems, curtain walling, roofing and exterior cladding, and shop fronts. Besides, they also find place in the telecommunication and transport industry. In transport industry aluminum extruded products are found in rail vehicles, marine applications, airframes and for vehicles on the road.

So, what makes aluminum so popular? It is the versatility and the flexibility of the material that turns in so popular. Since aluminum is high temperature resistance and is corrosion resistant as well it is used to make utensils and is also used on transport vehicles. Besides, it is strong even though it is light weight and thus it is used in airframes.

So, if you are out there still deciding on selecting aluminum extruded products or some other metal you can give your votes to this metal as it is affordable and durable as well. No more second thoughts to this go ahead with aluminum extrusion and the products.

The Pros and Cons of Using Aluminum Doors

Aluminium Window Frames For Sale

Aluminum doors are a popular choice for commercial properties adding strength and durability and reducing the risk of the door being broken down. While these may seem a great choice, especially from modern buildings, they do offer their own advantages and disadvantages that you need to be aware of.

Aluminum doors come with a host of advantages, which is what makes them such a popular choice in the commercial and industrial industries. These are also increasing in popularity in modern homes, where homeowners are looking to add that industrial chic to their finished design.

One of the biggest advantages to this option is the stability, strength and durability that these doors provide. Aluminum is exceptionally strong and this is displayed by the quality and strength of these products, which can last for many years, often outlasting many of the other materials available on the market today.

They work exceptionally well in buildings which have already incorporated aluminum windows, blending the two together to create a beautifully finished building that will stand the test of time.

Another advantage to these products is their ability to stand up in any weather conditions. It doesn't matter if you are based in the heart of the dessert or on the coast, which is constantly plagued by sea air. These products are weatherproof and strong and can handle vast temperature changes without signs of wear and tear.

You will find that aluminum doors are available from most suppliers, which is always a huge advantage. They can be found in most suppliers around the world and do not require that you hunt for them. If you have already chosen this material for your entry, then you should be able to find a reputable supplier who can supply and install the product for you in the shortest space of time.

Only in cases where the door is custom made will this process take longer, but in the majority of cases the supplier will have a number of doors in various sizes readily available and just waiting to be installed.

A huge advantage for any business owners is to know that their door won't require much maintenance over the years. The good news is that aluminum doors don't rust, so they are ideal in any climate, especially those that are close to the sea. Salty air can be exceptionally damaging, but these products are treated ensuring that they can withstand anything that is thrown their way.

Everything available on the market comes with some disadvantages and aluminum doors are no different. There are some cons to using these products over the other materials available on the market.

One of the disadvantages is that they tend to stain from constant water. If your building is in a very wet area which sees a lot of rain, you can expect some marks which will increase over time. While the product won't rust, the marks can be rather unsightly, so this needs to be taken into consideration when making a final decision on whether these are the right choice for your business or building.

Another disadvantage is that these can be more expensive that the other products available on the market. The metal prices are constantly fluctuating which makes it exceptionally difficult to budget until you have the product on order.

Most suppliers will be able to give you a final price when you ask for an estimate. Also bear in mind that because these are such high quality doors, they do require specialist installers who have experience with these products, ensuring they are installed to the highest standard.

Choosing someone to handle the installation that aren't knowledgeable on aluminum doors can result in you having to call out a repair company much sooner than anticipated.

Aluminium Window Frames Catalogue

https://ferngully.co.za/guide-2/

Fern Gully Have Aluminium Windows And Doors List

Aluminium Window And Door Importers Sandton

Aluminum is one of the most used metals in today’s society – Aluminium Window And Door Importers in Sandton  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Alspec Aluminium Catalogue

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Window Frame Extrusions it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Sections Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows South Africa

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusions For Sale the drawing process is skipped.

Aluminium Windows Pretoria

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Window And Door Importers in Sandton?

Aluminium Windows

The proper placement of doors and windows is essential in a house for the good light and ventilation. So, what would be better than having the option of aluminium doors and windows? The correct ventilation not only provides you with fresh air but keeps the house cool and cuts down the electricity bills, to a certain extent. There are many other green and eco friendly materials for this purpose, but they don't give a good appealing view. Aluminium, on the other hand, has all these qualities and looks appealing to the eye also. They are super efficient, strong, light weight and cheap too. It also has other qualities like it can withstand many harsh factors like the chemicals, heat, corrosion, etc.

The other advantage of the aluminium doors and windows is that they are available in a huge range of shapes, designs, sizes and with different color finishes. The finishes include matte, solid, shiny, etc. You can also get it personalized paint finishes or faux finishes of your own choice. There is an option of the danmer customized doors windows and shutters. They are available in the form of the sliding doors, fixed windows, and many more. These would improve the indoor of your house.

These doors and windows consume far less space than the traditional ones made of iron or wood. This can be a boon in case you have less space at your place. Therefore, you can fit more and more things in a small area with the help of the aluminium doors and windows.

The other factor that makes it different from others is that these windows and doors are very easy to install and only require a bit of information. They are eco friendly and can be recycled. If combined with fiberglass or the plastic glass, then it could be the most intelligent thing one can do. It is the best combination which is attractive and low maintenance for the long run.

The doors and windows made of aluminium are extremely useful and can be recycled. It has many advantages over the wooden or the iron windows. So, the best option for your house is to have the proper symmetry and matching of the windows and doors which would make your house beautiful.

Porch Railing Materials

Aluminium Sections Catalogue

When double glazing first became a popular window choice in the 1960s, most frames were made of aluminum. Aluminum remained the most popular choice for framing double glazing windows through the mid-1980s, when it held over 60% of the market. Since the introduction of PVC window framing, the market share of aluminum framed windows has dropped steadily. As of 2003, less than 17% of windows sold were aluminum framed. There are many reasons for the drop in popularity - and still some good reasons for choosing aluminum over PVC or wood frames.

The early popularity of aluminum was based on price and convenience. Aluminum was far less expensive than wood, the only other choice for window framing in the early years of double glazing. In addition, aluminum is easily extruded in the shapes and lengths needed to frame windows of any shape or size. It's strong, durable and very close to maintenance free.

Aluminum frames do have one significant drawback, however. Aluminum is an excellent conductor of heat and cold. It's such a good conductor, in fact, that in colder temperatures, frost often forms on interior surfaces of the windows close to the aluminum joints. The end result is windows that are significantly less able to conserve heat and energy than those framed in other materials.

PVCu was introduced in the mid-80s as a choice for framing double glazing windows, and immediately began to climb in popularity. When compared with aluminum frames, PVCu was less expensive, and more energy conservative. It can't match the strength of aluminum, however, and there are security concerns with its use. In addition, the introduction of 'thermal breaks' reduces the heat conductivity (measured in U values) of aluminum framed windows significantly. By fitting a less conductive material between the panes of the window as a sort of 'bridge' between the glass, manufacturers can bring the U value of aluminum framed double glazed windows within conservation standards.

The main selling points for aluminum window frames, then, were:

1. Strength - aluminum framed windows are far less prone to warping. The aluminum withstands weather well, needs no painting and forms strong, rigid window frames that will fit for far longer than wood frames.

2. Cost - aluminum frames are far less expensive than wood frames. They are easier to manufacture, and the material is less expensive to begin with. On the other hand, the introduction of PVC has largely negated the advantage of cost. Far lower in price, and with more efficient heating, PVC has become the material of choice for framing double glazing windows.

3. Ease of maintenance - As opposed to wood, which is subject to warping and decay and needs repainting every 3-5 years, aluminum is virtually maintenance free. It never needs painting, doesn't rot or warp, and is rigid and strong enough to bear the load of window lintels with minimal reinforcement.

4. Security - Because of the tight fit possible with aluminum framed double glazed windows, they were - and still are - the choice where security is a paramount concern. It's very difficult to 'pop' an aluminum framed window from its frame if it's properly fitted.

Aluminium Windows South Africa

 


https://ferngully.co.za/guide-2/

Fern Gully Have Aluminium Windows And Doors List

Aluminium Window And Door Importers Review

Aluminum is one of the most used metals in today’s society – Aluminium Window And Door Importers in Review  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Alspec Aluminium Catalogue

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Cabinet Extrusions it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Frames For Sale

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminium Frame Company the drawing process is skipped.

Aluminium Window Frames Catalogue

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Aluminium Window And Door Importers in Review?

Aluminium Window Frames For Sale

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

Why And Why Not Opt For An Aluminum Sliding Door

Aluminium Windows Pretoria

When double glazing first became a popular window choice in the 1960s, most frames were made of aluminum. Aluminum remained the most popular choice for framing double glazing windows through the mid-1980s, when it held over 60% of the market. Since the introduction of PVC window framing, the market share of aluminum framed windows has dropped steadily. As of 2003, less than 17% of windows sold were aluminum framed. There are many reasons for the drop in popularity - and still some good reasons for choosing aluminum over PVC or wood frames.

The early popularity of aluminum was based on price and convenience. Aluminum was far less expensive than wood, the only other choice for window framing in the early years of double glazing. In addition, aluminum is easily extruded in the shapes and lengths needed to frame windows of any shape or size. It's strong, durable and very close to maintenance free.

Aluminum frames do have one significant drawback, however. Aluminum is an excellent conductor of heat and cold. It's such a good conductor, in fact, that in colder temperatures, frost often forms on interior surfaces of the windows close to the aluminum joints. The end result is windows that are significantly less able to conserve heat and energy than those framed in other materials.

PVCu was introduced in the mid-80s as a choice for framing double glazing windows, and immediately began to climb in popularity. When compared with aluminum frames, PVCu was less expensive, and more energy conservative. It can't match the strength of aluminum, however, and there are security concerns with its use. In addition, the introduction of 'thermal breaks' reduces the heat conductivity (measured in U values) of aluminum framed windows significantly. By fitting a less conductive material between the panes of the window as a sort of 'bridge' between the glass, manufacturers can bring the U value of aluminum framed double glazed windows within conservation standards.

The main selling points for aluminum window frames, then, were:

1. Strength - aluminum framed windows are far less prone to warping. The aluminum withstands weather well, needs no painting and forms strong, rigid window frames that will fit for far longer than wood frames.

2. Cost - aluminum frames are far less expensive than wood frames. They are easier to manufacture, and the material is less expensive to begin with. On the other hand, the introduction of PVC has largely negated the advantage of cost. Far lower in price, and with more efficient heating, PVC has become the material of choice for framing double glazing windows.

3. Ease of maintenance - As opposed to wood, which is subject to warping and decay and needs repainting every 3-5 years, aluminum is virtually maintenance free. It never needs painting, doesn't rot or warp, and is rigid and strong enough to bear the load of window lintels with minimal reinforcement.

4. Security - Because of the tight fit possible with aluminum framed double glazed windows, they were - and still are - the choice where security is a paramount concern. It's very difficult to 'pop' an aluminum framed window from its frame if it's properly fitted.

Alspec Aluminium Catalogue

 


https://ferngully.co.za/guide-2/

Fern Gully Have Aluminium Windows And Doors List