Double Angle Aluminium Extrusion Popular

Aluminum is one of the most used metals in today’s society – Double Angle Aluminium Extrusion in Popular  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Windows Pretoria

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Modular Aluminium Frame it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Window Sections Catalogue

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Z Extrusion the drawing process is skipped.

Aluminium Window Frames Details

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Double Angle Aluminium Extrusion in Popular?

Aluminium Windows Pretoria

Over the last several years, heavy-weight particle board and cabinet-based displays have lost their appeal and made way for the next innovation in displays systems - truss display systems. Today, exhibitors who want a display that looks substantial without the cost and assembly headache of cabinetry are choosing truss systems.

The Problem

Display systems that use materials such as cabinets and laminate panels to create larger island displays can cost exhibitors thousands in shipping and assembly costs alone for each show. On top of that, constant assembly and tear-down of these systems can leave them chipped, scratched and beat-up after just a few years.

The Solution

Today, while laminate panel systems are still widely used and requested, a new breed of aluminum frame displays can be a less-costly alternative. These systems are sleek, functional, and offer all of the amenities of laminate panel systems, including shelving, overhead lighting, and storage. Additionally, these systems offer versatile and striking visual options including backlit graphics, tension fabric graphics and areas for plasma screens and computer demos.

How They Can Maximize Your Budget

As an alternative to heavier wood displays, aluminum displays are much lighter in weight, making them far less costly to ship. Additionally, many aluminum frame displays assemble without the need for tools, saving money in set-up costs.

Advanced Aluminum Profile Systems Available on the Market

Alspec Aluminium Catalogue

Greenhouse kit frames may be made of galvanized steel pipe, aluminum, plastic or wood. It is very important when considering purchasing a greenhouse to look at the type of frame it is constructed of. There are also many different grades of these materials used. With the steel pipe frame you not only have to consider the size of the tubing, but also the spacing of the tubing. Naturally, closer spacing of the bows will result in a stronger frame. This is also true of aluminum frames. The thickness of the aluminum, the spacing and the extra supports will all determine the strength. What type of wood is being used is very important also.

Typically the prices going from low to high will be as follows.

1. Plastic frames
2. Lightweight Aluminum Frames
3. Pipe Frames
4. Wood Frames
5. Heavy Duty Aluminum Frames

Some of these such as the wood frames will require maintenance to keep up. The rest of the frame types are typically maintenance free.

Many consumers simply look at size, shape and price and do not consider that at some point they will probably want to add some accessories such as circulating fans, ventilation systems, hanging heaters, misting or fogging systems, etc. to their greenhouse. With plastic frames it is virtually impossible to add any accessories without building a frame to mount the accessories to. Many times these frames simply are not heavy enough to support even a hanging basket. Usually with wood and pipe frames the strength is there, but you will still need to do some extra framing out to mount the accessories. There are also some lighter weight aluminum frame greenhouse kits which will require additional framing to mount your accessories. Most quality aluminum framed greenhouses will offer a channel where bolts will slide to the exact location you desire to put your accessories. Usually this type of frame will even make it possible to add a wire shelf above your benches for extra space.

These are all just general guidelines. It is best to investigate each greenhouse kit on an individual basis.

Aluminium Windows

https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List

Double Angle Aluminium Extrusion Ratings

Aluminum is one of the most used metals in today’s society – Double Angle Aluminium Extrusion in Ratings  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Window Frames For Sale

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusion Profiles it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Window Frames For Sale

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Windows

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Extrusion Framing the drawing process is skipped.

Aluminium Windows Pretoria

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Double Angle Aluminium Extrusion in Ratings?

Aluminium Windows Pretoria

Glass doors are a great choice for both homes and businesses, and offer a great many advantages. In this article I'm going to look at specifically what those advantages are, as well as covering possible disadvantages which you should be aware of.

One of the most obvious and appealing benefits of doors made from glass is the fact that they allow light to pass through. For doors which open to the outside there is the benefit of being able to enjoy natural sunlight entering the room. Not only does this sunlight look and feel much more pleasant than artificial light, but it also helps to reduce the need for that artificial lighting, lowering costs as well as representing a greener alternative.

But even in cases where the door is not an exterior one, a glass door still allows light to pass from one room to the other, not only creating a visually more attractive space, but also a more practical one, since there are fewer shadows and darker areas, maximising the efficient use of the room.

One of the possible disadvantages of course with glass is that it does not usually permit privacy. Clearly this is why very few bathrooms have doors made from glass! But there is a way in which you can enjoy the benefits of a glass door being able to allow light to pass through it whilst also enjoying a certain amount of privacy. Frosted glass, or even coloured opaque glass can be used for both partitions and doors to create an attractive feature which also provides the privacy required.

Another benefit of glass as a material for use in doors and partitions is that it is incredibly durable and extremely easy to keep clean. Glass does not rust, or corrode, it is not susceptible to woodworm, and it doesn't collect dust. All that is necessary to keep the glass door or glass partition looking clean and attractive is to give it an occasional wipe with a cloth and some glass cleaner. This is ideal for both businesses and homes.

One of the disadvantages of glass doors is that they are more liable to crack or break if they receive a very sharp knock or heavy blow. However, such a blow would probably cause significant damage to any door, and as they're made of toughened glass, glass doors and partitions are more than tough enough to cope with everyday use, and should not shatter or break revealing sharp edges should a seriously hard knock cause any damage.

Modern digital printing now also enables glass doors to be patterned or to have designs added. This is less useful for homes, but for businesses and commercial properties it provides the opportunity to have company logos or other relevant information included on the glass.

With a choice of colours and many different types of frameless glass doors, including fixed, hinged, sliding and folding systems, there are many benefits worth considering, both for the home and for business environments.

Aluminium Windows and Doors - Beautifying the House

Aluminium Windows If you have a wonderful house with a great view of your garden or picture-postcard scenery spread gorgeously in front then you need doors that give an unimpeded view.
Consider the standard options like sliding doors. A part of the opening will always remain covered regardless of whether you use two partitions or three partitions. French doors simply do not suit large openings. The answer is custom bifold doors especially when the opening is large and an unrestricted view is desired. They save space and give an unhindered view of the exteriors.
The term bifold doors may be a misnomer since these doors are, in effect, made up of several panels that fold together like an accordion or concertina into a compact bunch of panels that do not take up much space and stay neatly on one side of the opening. You have a clear view. Standard panel sizes may range from 24 to 36 inches in width or customized to suit the width of the openings, which could be a better option in some cases. Custom bifold doors can help save space and the use of matching hardware means it will be a joy to operate.
Customization could take several forms. You can choose to have bifold doors with narrow or broader panels to suit design considerations and aesthetics of how the door will look when fully closed. Narrow panels do give a nice look but in some cases one may wish for a less obstructed view in which case broader panels serve the purpose. Cost will also vary. Obviously more panels lead to higher cost but the advantage is that opening and closing the bifolds will be easier when the door has narrow panels and they take up less space.
Where there are doors with glass the question of curtains or blinds always comes up. Here again customization helps when you choose double glazing panels with inbuilt blinds that are totally sealed within and can be opened or closed by sliding a magnetic latch. Such integrated bifold doors also help save space and present a neater appearance. Then there are small details that the installer and manufacturer will take care of such as using quality sliding tracks, pivots and hinges that integrate seamlessly into the aluminum frame. Another matter that necessitates customization is whether to place the track at the top or bottom. It is best to consult a reputed door supplier and installer and get a site inspection in order to get a customized fitting.
Bifold doors are not meant just as a partition between indoors and outdoors. They can also be used indoors to good effect as space savers between rooms. One can have a larger opening without the inconvenience of large door panels creating obstructions in confined spaces.
Bifold doors have several advantages such as ease of use, complete opening up of a room to the outside, security with the right set of hardware and energy efficiency. These advantages can be further enhanced by customizing the bifold panels along with glazing and hardware fittings. Aluminium Window Frames Details

https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List

Double Angle Aluminium Extrusion Gauteng

Aluminum is one of the most used metals in today’s society – Double Angle Aluminium Extrusion in Gauteng  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Window Frames Catalogue

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum T Frame it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows South Africa

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Aluminium Window Frames Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Buy Aluminum Extrusion the drawing process is skipped.

Aluminium Window Frames For Sale

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Double Angle Aluminium Extrusion in Gauteng?

Aluminium Windows Cape Town

Glass doors are a great choice for both homes and businesses, and offer a great many advantages. In this article I'm going to look at specifically what those advantages are, as well as covering possible disadvantages which you should be aware of.

One of the most obvious and appealing benefits of doors made from glass is the fact that they allow light to pass through. For doors which open to the outside there is the benefit of being able to enjoy natural sunlight entering the room. Not only does this sunlight look and feel much more pleasant than artificial light, but it also helps to reduce the need for that artificial lighting, lowering costs as well as representing a greener alternative.

But even in cases where the door is not an exterior one, a glass door still allows light to pass from one room to the other, not only creating a visually more attractive space, but also a more practical one, since there are fewer shadows and darker areas, maximising the efficient use of the room.

One of the possible disadvantages of course with glass is that it does not usually permit privacy. Clearly this is why very few bathrooms have doors made from glass! But there is a way in which you can enjoy the benefits of a glass door being able to allow light to pass through it whilst also enjoying a certain amount of privacy. Frosted glass, or even coloured opaque glass can be used for both partitions and doors to create an attractive feature which also provides the privacy required.

Another benefit of glass as a material for use in doors and partitions is that it is incredibly durable and extremely easy to keep clean. Glass does not rust, or corrode, it is not susceptible to woodworm, and it doesn't collect dust. All that is necessary to keep the glass door or glass partition looking clean and attractive is to give it an occasional wipe with a cloth and some glass cleaner. This is ideal for both businesses and homes.

One of the disadvantages of glass doors is that they are more liable to crack or break if they receive a very sharp knock or heavy blow. However, such a blow would probably cause significant damage to any door, and as they're made of toughened glass, glass doors and partitions are more than tough enough to cope with everyday use, and should not shatter or break revealing sharp edges should a seriously hard knock cause any damage.

Modern digital printing now also enables glass doors to be patterned or to have designs added. This is less useful for homes, but for businesses and commercial properties it provides the opportunity to have company logos or other relevant information included on the glass.

With a choice of colours and many different types of frameless glass doors, including fixed, hinged, sliding and folding systems, there are many benefits worth considering, both for the home and for business environments.

How to Choose Quality Aluminum Windows and Doors

Alspec Aluminium Catalogue

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

Aluminium Window Frames Catalogue

 


https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List

Double Angle Aluminium Extrusion Rating

Aluminum is one of the most used metals in today’s society – Double Angle Aluminium Extrusion in Rating  it can be found across a number of industries, such as construction and commercial, and in a number of applications, such as beverage cans and appliances. When choosing a manufacturer of aluminium extrusion for supplying the metal that you use in your workplace, however, it is important that you carefully consider which one will be best for your needs.

Aluminium Window Frames For Sale

The manufacturer will begin by removing the aluminium from deep within the earth’s crust (either as bauxite ore or feldspar). Often, the Bayer’s method, Wohler’s method or Hall Heroult method is chosen to remove the metal in its molten form. It is then hardened and moulded into whatever shape the manufacturer desires. When the aluminium is extracted from the earth in its solid form, Aluminum Extrusions Retail it will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.

Aluminium Windows

Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.

Alspec Aluminium Catalogue

The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.

Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape. Deep drawing, for example, is used give the metal a cup, conical tapered, cylinder and seamless tube shape. For less curved shapes, Aluminum Window Frame Extrusions the drawing process is skipped.

Aluminium Windows Cape Town

Once you are satisfied with the processes and methods utilized by a potential manufacturer of aluminium extrusions, you can begin submitting your orders with them. If, after your first delivery, you are still satisfied with the manufacturer based on the promptness of the order being filled and the quality of the aluminium that you receive, you can continue the relationship.

Double Angle Aluminium Extrusion in Rating?

Aluminium Window Sections Catalogue

"We can't stop the thugs in this neighborhood from breaking out, shooting out, and vandalizing these expensive insulated glass windows we put in the school just last year," the maintenance supervisor said. "Do you have a solution that can stop our cycle of throwing good money after bad?" he said. Unfortunately this is not an unfamiliar concern with owners, managers, and maintenance supervisors of commercial buildings, schools, courthouses, and transit authorities.

How can you stop this cycle of spending, time loss, and frustration? Consider solid glass block window and walls. In this article you'll learn:

1. Why architects and building owners use high security glass masonry units
2. Where to use solid blocks and glass bricks.
3. Options and accessories in security blocks and bricks.

Why architects and building owners use high security glass masonry units

The cheapest way to put up a glass window or wall in a commercial, architectural, or institutional project is with a standard single pane or insulated glass system constructed generally with a vinyl or aluminum framing system. However if your business or facility is located where graffiti, vandalism, bullets, bad weather, noise, or fire are a concern the lowest initial cost window or wall system may not be the answer for achieve the best life cycle costs. The Vistabrik line of solid security glass blocks from Pittsburgh Corning may be what you're searching for. Some reasons building owners have chosen this line of blocks include:

Bullet resistant- These blocks are UL tested and made of 3" thick glass to resist penetration from high impact weapons including 9 mm and .357 magnum bullets.

Reduce vandalism and graffiti - With "non-stick" glass surfaces graffiti is easier to remove and forcible entry is difficult since 8" x 8" x 3" blocks weigh 40 lbs. per square foot mortared together.

Fire resistant - When a higher level of building safety and fire resistance are desired without having to look at ugly wires in the glass, solid glass blocks are a preferred choice. Window panels can be designed with 45, 60, and 90 minute UL approved fire ratings.

Noise reduction - Buildings near train stations, large crowds, traffic, and machinery can be hard to lease and suffer from poor employee productivity. Solid glass bricks have a Sound Transmission Class of 53 and a noise reduction coefficient of .05 resulting in quieter interior spaces.

Cut maintenance costs - Solid glass masonry units can reduce total costs of ownership if you select this durable, hard to break block at the initial stages of the building project - thereby saving ongoing maintenance costs of repair and replacing glass windows and walls.

Where to use solid blocks and glass bricks

Here are some places where solid glass blocks have been used most frequently in commercial, institutional and architectural projects:

Gymnasiums and recreation facilities - one installation is Lloyd Hall in Philadelphia Pennsylvania.

Elevated walkways and parking garages - (check out the walkway at Perry High School in Pittsburgh Pennsylvania and parking garage at Logan Airport in Boston Massachusetts).

Glass block stairwells, shelters, and walls in transit stations, jails, detention centers, courthouses, police stations, and embassies - Solid glass units provide security without giving up light and looks. Some interesting installations include Yankee Stadium Complex for the New York City Transit Authority and the Clay County Detention Center in Liberty Missouri.

Glass block windows in factories and manufacturing buildings - A building owner in Columbus Ohio is planning to use solid glass bricks to replace insulated glass aluminum framed windows that have been getting broken and shot out.

Options and Accessories in Security Blocks and Bricks

If you're looking for a clear view window or wall or need higher privacy, then the selection of solid glass blocks is for you. For a high clarity look there are 8" x 8" x 3", 4" x 8" x 3" and 3" x 8" x 3" sizes available. For higher privacy projects the 8" x 8" x 3" size can be supplied with a stippled face.

The solid blocks are generally mortared together with galvanized panel reinforcing through the horizontal mortar joints (usually every 24") and panel anchors (every 24" as well) to tie the window panels into the jambs or sides of the opening. These glass masonry units also meet tempered glass windows standards due to their strength.

Conclusion

Keeping building costs and security and safety concerns down has never been as important as it is today in our unstable world. Using solid security glass block windows and walls can be one step to provide building owners, employees, and parents with increased comfort, style, security and most importantly - peace of mind.

Understanding The Processes Used In Aluminum Extrusion

Aluminium Windows Pretoria

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

Alspec Aluminium Catalogue

 


https://ferngully.co.za/ratings-2/

Fern Gully Have Aluminium Extrusion List